Lines Matching refs:network
38 for using per-network random MAC addresses
169 - enable PMF automatically for network profiles created from
171 * fixed OWE network profile saving
172 * fixed DPP network profile saving
174 (CONFIG_OCV=y and network profile parameter ocv=1)
242 (group_mgmt network profile parameter)
303 - allow pairwise/group cipher to be configured in the network profile
310 (RSN) mesh network
378 (tls_ext_cert_check=1 in the network profile phase1 parameter)
409 * added wps_disabled=1 network profile parameter to allow AP mode to
462 for all network profiles added by WPS
522 configured networks to be listed even with huge number of network
538 * add domain_match network profile parameter (similar to
550 implement Interworking network selection behavior in upper layers
590 * added option to set Hotspot 2.0 Rel 2 update_identifier in network
601 with the same network block that generated them
659 * added phase1 network parameter options for disabling TLS v1.1 and v1.2
665 - prefer the last added network in Interworking connection to make the
673 * OSEN network for online signup connection
783 without executing roaming/network re-selection on scan results
789 * disable network block temporarily on repeated connection failures
793 * remove duplicate networks when Interworking network selection uses the
794 same network
796 limited for all cases instead of just for a specific network block
814 * added global bgscan configuration option as a default for all network
835 file is used to maintain other network information
891 * do not save an invalid network block in wpa_supplicant.conf to avoid
897 network offload with sched_scan driver command
946 * EAP-SIM/AKA: store pseudonym identity in network configuration to
952 - GAS/ANQP to fetch network information
953 - credential configuration and automatic network selections based on
955 * limited PMKSA cache entries to be used only with the network context
994 * added optional persistent=<network id> parameter for p2p_connect to
1042 * disable network block temporarily on authentication failures
1051 * optimized scan result use for network selection
1059 from network selection
1074 by default for all network blocks
1136 network in scan results) using scan_interval command.
1142 used to clear the bssid_set flag in a network block, i.e., to remove
1207 - Add wps_er_set_config to enroll a network based on a local
1208 network configuration block instead of having to (re-)learn the
1283 * add freq_list network configuration parameter to allow the AP
1288 ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
1352 * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
1374 (scan_freq option in the network configuration block); this can speed
1376 subset of channels is actually used in the network (this is currently
1381 network-specific optimizations to be used to improve roaming within
1388 enroll credentials for a network using PIN and PBC methods; in
1411 and password="Ki:OPc"/password="Ki:OPc:SQN" in network configuration)
1412 * added a new network configuration option, wpa_ptk_rekey, that can be
1464 * removed 'nai' and 'eappsk' network configuration variables that were
1560 * added network configuration parameter 'frequency' for setting
1631 * changed ctrl_iface network configuration 'get' operations to not
1681 * fixed selection of the first network in ap_scan=2 mode; previously,
1683 network for enabled (e.g., after 'wpa_cli select_network 0')
1697 * added a new network block configuration option, fragment_size, to
1714 * added new configuration option for identifying which network block
1719 automatically for the network and that can be used with
1722 status changes or when associating with a different network
1761 * driver_ndis: use BSSID OID polling to detect when IBSS network is
1768 * added support for controlling network device operational state
1786 access for a network that has not enabled EAP-AKA
1911 for variables as empty network definitions read from config file
1947 and removing network interfaces dynamically (-g command line argument
1953 - added possibility to edit the current network configuration
1969 PF_PACKET in order to prepare for network devices that do not use
1970 Ethernet headers (e.g., network stack that includes IEEE 802.11
1982 server_nai configuration option from network blocks
2014 configured networks ('wpa_cli enable_network <network id>' and
2015 'wpa_cli disable_network <network id>')
2016 * added support for adding and removing network from the current
2018 <network id>'); added networks are disabled by default and they can
2020 for the new network; note: configuration file is not yet updated, so
2022 * added support for setting network configuration parameters through
2024 wpa_cli set_network 0 ssid "\"my network\""
2035 open network configuration)
2050 * added support for using ap_scan=2 mode with multiple network blocks;
2054 and the network block order in the file is used instead
2082 by using test driver interface without any kernel drivers or network
2109 * added support for selecting a network from the list of all configured
2110 networks ('wpa_cli select_network <network id>'; this disabled all
2145 - network: engine, engine_id, key_id
2208 (mode=1 in network block); this included a new key_mgmt mode
2282 ap_scan=2 is used, only the first network block in the configuration
2392 disabled with network block option eap_workaround=0
2444 * added priority option for network blocks in the configuration file;
2446 results are searched for matches with network blocks in this order)