Lines Matching refs:used
6 used to enable enrollment of client devices.
37 when WPS is used to configure the access point.
47 hostapd includes an optional WPS component that can be used as an
50 be used to allow external WPS Registrars to configure the access
67 Following parameter can be used to enable support for NFC config method:
125 The PIN value used in the commands must be processed by an UI to
127 digit. "hostapd_cli wps_check_pin <PIN>" can be used to do such
177 to be selected before connecting), wildcard UUID may be used to allow
178 the PIN to be used once with any UUID:
182 To reduce likelihood of PIN being used with other devices or of
202 If the AP includes a pushbutton, WPS PBC mode can be used. It is
215 When an external Registrar is used, the AP can act as an Enrollee and
262 then need to be used to provide pre-configured Credential attribute(s)
265 also be used to add additional networks if the Registrar is used to
269 wps_cred_processing=1 option. When this is used, an external program
282 This can be used to trigger change from unconfigured to configured
284 registration). In addition, this can be used to update AP UI about the
292 This can be used to update the externally stored AP configuration and
299 WPS can be used with NFC-based configuration method. An NFC tag
300 containing a password token from the Enrollee can be used to
302 with a configuration token can be used to transfer AP settings without
306 can be used by touching the NFC interface of an external Registrar. The
307 wps_nfc_token command is used to manage use of the NFC password token
316 wpa_supplicant can be used to generate NFC password tokens during
319 The "wps_nfc_config_token <WPS/NDEF>" command can be used to build an
325 can be used to touch an NFC interface on a station to provision the
340 "nfc_get_handover_sel <NDEF> <WPS>" command can be used to build the
348 <carrier from handover select>" is used to report completed NFC