Lines Matching refs:used
4 wpa_supplicant implements a control interface that can be used by
11 wpa_supplicant. This library can also be used with C++. \ref wpa_cli.c and
17 the functions defined in \ref wpa_ctrl.h can be used to hide the details of
18 the used IPC from external programs.
39 If the control interface connection is used both for commands and
52 be closed by calling \ref wpa_ctrl_close(). If the connection was used for
59 Following commands can be used with \ref wpa_ctrl_request():
63 This command can be used to test whether wpa_supplicant is replying
289 Get detailed per-BSS scan results. \c BSS command can be used to
331 used to enable all network.
338 used to disable all network.
353 used to remove all network.
385 Start P2P device discovery. Optional parameter can be used to specify
398 social channel scans. Progressive device discovery can be used to find
427 used (e.g., 12345670). [label|display|keypad] is used with PIN method
428 to specify which PIN is used (label=PIN from local label,
431 parameter can be used to request a persistent group to be formed.
441 The optional "go_intent" parameter can be used to override the default
447 Start Listen-only state. Optional parameter can be used to specify the
450 for testing. It can also be used to keep the device discoverable
456 Terminate a P2P group. If a new virtual network interface was used for
458 group interface is used as a parameter for this command.
465 GO. Optional persistent=<network id> can be used to specify restart of
496 "1f77628") that can be used to cancel the request. Directed requests
520 Indicate that local services have changed. This is used to increment
560 two parameters are used: availability period and availability interval
578 - OTP (one-time password; like password, but the value is used only once)
601 values used in the same format as in wpa_supplicant configuration.
681 Following priority levels are used:
690 used to set the level of messages which will be delivered. It should
692 particulat prefix and are subject to change. They may be used for
809 WPS_EVENT_ENROLLEE_SEEN: WPS Enrollee was detected (used in AP mode).
942 role (GO/client), SSID. The passphrase used in the group is also
967 used to accept the request with the same PIN configured for the
992 peer_address. P2P_CONNECT command can be used to accept the request.
1004 after the event prefix: peer_address. P2P_CONNECT command can be used to