Lines Matching refs:prefix

567 (e.g., password), it will use a specific prefix, \c CTRL-REQ-
570 \c CTRL-RSP- (\a WPA_CTRL_RSP macro) prefix in a command with matching
672 a fixed prefix text as defined in \ref wpa_ctrl.h. After this, optional
692 particulat prefix and are subject to change. They may be used for
753 WPA_EVENT_BSS_ADDED: A new BSS entry was added. The event prefix is
762 WPA_EVENT_BSS_REMOVED: A BSS entry was removed. The event prefix is
810 The event prefix is followed by MAC addr, UUID-E, pri dev type,
885 event prefix is followed by the MAC address of the station.
965 included after the event prefix: peer_address PIN. The PIN is a
980 the event prefix: peer address.
991 using PBC. The following parameters are included after the event prefix:
1004 after the event prefix: peer_address. P2P_CONNECT command can be used to
1014 request. The following parameters are included after the event prefix:
1025 response. The following parameters are included after the event prefix:
1036 Request. For persistent groups, the parameter after the event prefix