Lines Matching refs:network
119 - enable PMF automatically for network profiles created from
121 * fixed OWE network profile saving
122 * fixed DPP network profile saving
124 (CONFIG_OCV=y and network profile parameter ocv=1)
192 (group_mgmt network profile parameter)
253 - allow pairwise/group cipher to be configured in the network profile
260 (RSN) mesh network
328 (tls_ext_cert_check=1 in the network profile phase1 parameter)
359 * added wps_disabled=1 network profile parameter to allow AP mode to
412 for all network profiles added by WPS
472 configured networks to be listed even with huge number of network
488 * add domain_match network profile parameter (similar to
500 implement Interworking network selection behavior in upper layers
540 * added option to set Hotspot 2.0 Rel 2 update_identifier in network
551 with the same network block that generated them
609 * added phase1 network parameter options for disabling TLS v1.1 and v1.2
615 - prefer the last added network in Interworking connection to make the
623 * OSEN network for online signup connection
733 without executing roaming/network re-selection on scan results
739 * disable network block temporarily on repeated connection failures
743 * remove duplicate networks when Interworking network selection uses the
744 same network
746 limited for all cases instead of just for a specific network block
764 * added global bgscan configuration option as a default for all network
785 file is used to maintain other network information
841 * do not save an invalid network block in wpa_supplicant.conf to avoid
847 network offload with sched_scan driver command
896 * EAP-SIM/AKA: store pseudonym identity in network configuration to
902 - GAS/ANQP to fetch network information
903 - credential configuration and automatic network selections based on
905 * limited PMKSA cache entries to be used only with the network context
944 * added optional persistent=<network id> parameter for p2p_connect to
992 * disable network block temporarily on authentication failures
1001 * optimized scan result use for network selection
1009 from network selection
1024 by default for all network blocks
1086 network in scan results) using scan_interval command.
1092 used to clear the bssid_set flag in a network block, i.e., to remove
1157 - Add wps_er_set_config to enroll a network based on a local
1158 network configuration block instead of having to (re-)learn the
1233 * add freq_list network configuration parameter to allow the AP
1238 ESS quite a bit, e.g., with bgscan="simple:30:-45:300" in the network
1302 * added AP mode functionality (CONFIG_AP=y) with mode=2 in the network
1324 (scan_freq option in the network configuration block); this can speed
1326 subset of channels is actually used in the network (this is currently
1331 network-specific optimizations to be used to improve roaming within
1338 enroll credentials for a network using PIN and PBC methods; in
1361 and password="Ki:OPc"/password="Ki:OPc:SQN" in network configuration)
1362 * added a new network configuration option, wpa_ptk_rekey, that can be
1414 * removed 'nai' and 'eappsk' network configuration variables that were
1510 * added network configuration parameter 'frequency' for setting
1581 * changed ctrl_iface network configuration 'get' operations to not
1631 * fixed selection of the first network in ap_scan=2 mode; previously,
1633 network for enabled (e.g., after 'wpa_cli select_network 0')
1647 * added a new network block configuration option, fragment_size, to
1664 * added new configuration option for identifying which network block
1669 automatically for the network and that can be used with
1672 status changes or when associating with a different network
1711 * driver_ndis: use BSSID OID polling to detect when IBSS network is
1718 * added support for controlling network device operational state
1736 access for a network that has not enabled EAP-AKA
1861 for variables as empty network definitions read from config file
1897 and removing network interfaces dynamically (-g command line argument
1903 - added possibility to edit the current network configuration
1919 PF_PACKET in order to prepare for network devices that do not use
1920 Ethernet headers (e.g., network stack that includes IEEE 802.11
1932 server_nai configuration option from network blocks
1964 configured networks ('wpa_cli enable_network <network id>' and
1965 'wpa_cli disable_network <network id>')
1966 * added support for adding and removing network from the current
1968 <network id>'); added networks are disabled by default and they can
1970 for the new network; note: configuration file is not yet updated, so
1972 * added support for setting network configuration parameters through
1974 wpa_cli set_network 0 ssid "\"my network\""
1985 open network configuration)
2000 * added support for using ap_scan=2 mode with multiple network blocks;
2004 and the network block order in the file is used instead
2032 by using test driver interface without any kernel drivers or network
2059 * added support for selecting a network from the list of all configured
2060 networks ('wpa_cli select_network <network id>'; this disabled all
2095 - network: engine, engine_id, key_id
2158 (mode=1 in network block); this included a new key_mgmt mode
2232 ap_scan=2 is used, only the first network block in the configuration
2342 disabled with network block option eap_workaround=0
2394 * added priority option for network blocks in the configuration file;
2396 results are searched for matches with network blocks in this order)