Lines Matching refs:device

25 tested device at all or without knowing details of its
28 traffic is used to verify reaction of the tested device to such
37 wpa_supplicant is used to control a test device in station mode to test
38 an AP and hostapd is similarly used to control a test device in AP mode
87 beginning if the other device is not yet in the ARP table, so working
162 Testing replay protection on a station device
165 Start hostapd and use hostapd_cli on the test device to control testing
185 device increases beyond the value used prior to that RESET_PN command.
197 from the test device increases beyond the value used prior to that
201 Testing replay protection on an AP device
204 Start the AP (DUT) and start wpa_supplicant on the test device to
205 connect to the network. Use wpa_cli to control the test device.
222 traffic can recover once the packet number from the test device
231 Testing GTK reinstallation protection on a station device (group handshake)
244 Test broadcast connectivity; should not work; if it does, the device
249 Testing GTK reinstallation protection on a station device (4-way handshake)
262 Test broadcast connectivity; should not work; if it does, the device
287 Testing TK reinstallation protection on a station device (4-way handshake)
300 Test unicast connectivity; should not work; if it does, the device
325 Testing ANonce generation on an AP device
328 Start the AP (DUT) and start wpa_supplicant on the test device to
329 connect to the network. Use wpa_cli to control the test device.
352 Testing FT Reassociation Request frame retransmission on an AP device
362   the AP or from a device behind the AP); this needs to work
365   the AP or from a device behind the AP); this is likely to fail, but