Lines Matching full:on
63 … If oversampling is enabled on both regular and injected groups, this
83 * without conversion on going on group regular.
84 … parameters 'LowPowerAutoWait' and 'DMAContinuousRequests': ADC enabled without conversion on going
85 * on groups regular and injected.
88 * parameter (which fulfills the ADC state condition) on the fly).
97 … Note: In case of usage of channels on injected group, ADC frequency should be
101 … Note: In case of synchronous clock mode based on HCLK/1, the configuration must
117 data, based on following formula:
158 … Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on,
173 This parameter is dependent on ScanConvMode:
185 … Note: This parameter must be modified when no conversion is on going on regular
197 … Note: On this STM32 series, ADC group regular number of discontinuous
246 ongoing on ADC groups regular and injected */
260 * on going on regular group.
261 …For parameters 'SamplingTime', 'Offset', 'OffsetNumber': ADC enabled without conversion on going on
265 * parameter (which fulfills the ADC state condition) on the fly).
271 … Note: Depending on devices and ADC instances, some channels may not be available
272 … on device package pins. Refer to device datasheet for channels
310 update on the fly) */
317 uint32_t Offset; /*!< Define the offset to be applied on the raw converted data.
322 … Note: This parameter must be modified when no conversion is on going on both
329 … Note: This parameter must be modified when no conversion is on going on both
334 … Note: This parameter must be modified when no conversion is on going on both
345 on going on ADC groups regular and injected.
346 …For parameters 'HighThreshold', 'LowThreshold': ADC enabled with conversion on going on regular and
362 … successively the AWD init structure. Channels on ADC
372 … is configured on single channel (only 1 channel can be
391 … impacted: the comparison of analog watchdog thresholds is done on
403 … impacted: the comparison of analog watchdog thresholds is done on
453 #define HAL_ADC_STATE_REG_BUSY (0x00000100UL) /*!< A conversion on ADC group regular is …
455 … auto power-on (if feature available), multimode ADC master
457 #define HAL_ADC_STATE_REG_EOC (0x00000200UL) /*!< Conversion data available on group re…
459 #define HAL_ADC_STATE_REG_EOSMP (0x00000800UL) /*!< Not available on this STM32 series: E…
463 #define HAL_ADC_STATE_INJ_BUSY (0x00001000UL) /*!< A conversion on ADC group injected is…
465 … power auto power-on (if feature available), multimode
467 #define HAL_ADC_STATE_INJ_EOC (0x00002000UL) /*!< Conversion data available on group in…
625 (alignment on data register LSB bit 0)*/
627 (alignment on data register MSB bit 15)*/
770 /** @defgroup ADC_HAL_EC_REG_OVR_DATA_BEHAVIOR ADC group regular - Overrun behavior on conversion …
825 /* Note: VrefInt, TempSensor and Vbat internal channels are not available on */
847 … voltage reference. On this STM32 series, ADC channel available on all
850 … On this STM32 series, ADC channel available only on ADC1 instance. */
852 … On this STM32 series, ADC channel available only on ADC5 instance.
857 … On this STM32 series, ADC channel available on all Instances but ADC2 & ADC4.
860 … On this STM32 series, ADC channel available only on ADC1 instance. */
862 … On this STM32 series, ADC channel available only on ADC2 instance. */
864 … On this STM32 series, ADC channel available only on ADC2 instance. */
866 … On this STM32 series, ADC channel available only on ADC3 instance.
869 … On this STM32 series, ADC channel available only on ADC5 instance.
872 … On this STM32 series, ADC channel available only on ADC5 instance.
875 … On this STM32 series, ADC channel available only on ADC4 instance.
1001 * @note Analog watchdog 1 is available on all stm32 series
1002 * Analog watchdog 2 and 3 are not available on all series
1584 /* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */
1637 * (1) On STM32G4, parameter available only on ADC instance: ADC1.\n
1638 * (2) On STM32G4, parameter available only on ADC instance: ADC2.\n
1639 * (3) On STM32G4, parameter available only on ADC instance: ADC3.\n
1640 * (4) On STM32G4, parameter available only on ADC instance: ADC4.\n
1641 * (5) On STM32G4, parameter available only on ADC instance: ADC5.\n
1642 * (6) On STM32G4, parameter available only on ADC instances: ADC1, ADC3, ADC5.\n
1643 * (7) On STM32G4, parameter available only on ADC instances: ADC1, ADC3, ADC4, ADC5.\n
1644 …* On this STM32 series, all ADCx are not available on all devices. Refer to device dat…
1646 …* (8) On STM32G4, fast channel allows: 2.5 (sampling) + 12.5 (conversion) = 15 ADC clock c…
1694 * (1) On STM32G4, parameter available only on ADC instance: ADC1.\n
1695 * (2) On STM32G4, parameter available only on ADC instance: ADC2.\n
1696 * (3) On STM32G4, parameter available only on ADC instance: ADC3.\n
1697 * (4) On STM32G4, parameter available only on ADC instance: ADC4.\n
1698 * (5) On STM32G4, parameter available only on ADC instance: ADC5.\n
1699 * (6) On STM32G4, parameter available only on ADC instances: ADC1, ADC3, ADC5.\n
1700 * (7) On STM32G4, parameter available only on ADC instances: ADC1, ADC3, ADC4, ADC5.\n
1701 …* - On this STM32 series, all ADCx are not available on all devices. Refer to device dat…
1703 …* (8) On STM32G4, fast channel allows: 2.5 (sampling) + 12.5 (conversion) = 15 ADC clock c…
1763 * (1) On STM32G4, parameter available only on ADC instance: ADC1.\n
1764 * (2) On STM32G4, parameter available only on ADC instance: ADC2.\n
1765 * (3) On STM32G4, parameter available only on ADC instance: ADC3.\n
1766 * (4) On STM32G4, parameter available only on ADC instance: ADC4.\n
1767 * (5) On STM32G4, parameter available only on ADC instance: ADC5.\n
1768 * (6) On STM32G4, parameter available only on ADC instances: ADC1, ADC3, ADC5.\n
1769 * (7) On STM32G4, parameter available only on ADC instances: ADC1, ADC3, ADC4, ADC5.\n
1770 …* On this STM32 series, all ADCx are not available on all devices. Refer to device dat…
1772 …* (8) On STM32G4, fast channel allows: 2.5 (sampling) + 12.5 (conversion) = 15 ADC clock c…
1828 * (1) On STM32G4, parameter available only on ADC instance: ADC1.\n
1829 * (2) On STM32G4, parameter available only on ADC instance: ADC2.\n
1830 * (3) On STM32G4, parameter available only on ADC instance: ADC3.\n
1831 * (4) On STM32G4, parameter available only on ADC instance: ADC4.\n
1832 * (5) On STM32G4, parameter available only on ADC instance: ADC5.\n
1833 * (6) On STM32G4, parameter available only on ADC instances: ADC1, ADC3, ADC5.\n
1834 * (7) On STM32G4, parameter available only on ADC instances: ADC1, ADC3, ADC4, ADC5.\n
1835 …* On this STM32 series, all ADCx are not available on all devices. Refer to device dat…
1837 …* (8) On STM32G4, fast channel allows: 2.5 (sampling) + 12.5 (conversion) = 15 ADC clock c…
1867 * selected is available on the ADC instance selected.
1892 * (1) On STM32G4, parameter available only on ADC instance: ADC1.\n
1893 * (2) On STM32G4, parameter available only on ADC instance: ADC2.\n
1894 * (3) On STM32G4, parameter available only on ADC instance: ADC3.\n
1895 * (4) On STM32G4, parameter available only on ADC instance: ADC4.\n
1896 * (5) On STM32G4, parameter available only on ADC instance: ADC5.\n
1897 * (6) On STM32G4, parameter available only on ADC instances: ADC1, ADC3, ADC5.\n
1898 * (7) On STM32G4, parameter available only on ADC instances: ADC1, ADC3, ADC4, ADC5.\n
1899 …* On this STM32 series, all ADCx are not available on all devices. Refer to device dat…
1901 …* @retval Value "0" if the internal channel selected is not available on the ADC instance selected.
1902 * Value "1" if the internal channel selected is available on the ADC instance selected.
1945 * @note On devices with only 1 ADC common instance, parameter of this macro
2052 * @note This voltage depends on user board environment: voltage level
2054 * On devices with small package, the pin Vref+ is not present
2056 * @note On this STM32 series, calibration data of internal voltage reference
2103 * @note On this STM32 series, calibration data of temperature sensor
2145 * If temperature sensor calibration values are available on
2146 * on this device (presence of macro __LL_ADC_CALC_TEMPERATURE()),
2159 …* On STM32G4, refer to device datasheet parameter "Avg_Slop…
2162 * On STM32G4, refer to device datasheet parameter "V30"