Lines Matching +full:requirements +full:- +full:test
1 /*$Id: //dwh/bluetooth/DWC_ble154combo/firmware/rel/1.30a-SOW05PatchV6/firmware/public_inc/ll_intf.…
18 * Copyright (c) 2020-Present Synopsys, Inc
62 * be used to meet the requirements of the host or application in
187 * @brief The data in one advertising report from the non-connection manager to the LL interface
241 …* @brief The data in one direct advertising report from the non-connection manager to the LL inter…
296 uint8_t nse; /* number of sub-event*/
331 * @brief Structure containing the Create BIG Test command parameters
340 …uint8_t pto; /* (Pre_Transmission_Offset) the offset in number of ISO_Intervals for pre-trans…
384 uint8_t pto; /*Offset used for pre-transmissions*/
403 uint8_t pto; /*Offset used for pre-transmissions*/
540 …uint8_t connless_cte_enable; /* Enable/Disable Connectionless CTE transmission. Enable:1 - Disable…
552 …uint8_t iq_sampling_enable; /* Enable/Disable Connectionless IQ samples capturing. Enable:1 - Dis…
567 … Enable/Disable sampling the received CTE fields on this connection handle. Enable:1 - Disable:0 */
593 …0x0001 - 0xFFFF : Requested interval for sending LL_CTE_REQ PDUs in number of connection events. */
594 …uint8_t cte_req_enable; /* Enable/Disable CTE Request transmission for the connection. Enable:1 -…
608 …rsp_enable; /* Enable/Disable CTE Response transmission for the connection. Enable:1 - Disable:0 */
615 * @brief LE Receiver Test command [v3]
622 …/* specify the expected length of the Constant Tone Extension in received test reference packets */
623 …; /* specify the expected type of the Constant Tone Extension in expected test reference packets */
630 * @brief LE Transmitter Test command [v3]
635 uint8_t length_of_test_data; /* specify the length of the Payload of the test reference packets */
636 …uint8_t packet_payload; /* specify the con_le_rx_test_v3_cmd_sttents of the Payload of the test r…
638 …uint8_t cte_length; /* specify the length of the Constant Tone Extension in the test reference pa…
639 …uint8_t cte_type; /* specify the type of the Constant Tone Extension in the test reference packet…
705 * @brief LE Transmitter Test command [v4]
710 uint8_t length_of_test_data; /* specify the length of the Payload of the test reference packets */
711 …uint8_t packet_payload; /* specify the con_le_rx_test_v3_cmd_sttents of the Payload of the test r…
713 …uint8_t cte_length; /* specify the length of the Constant Tone Extension in the test reference pa…
714 …uint8_t cte_type; /* specify the type of the Constant Tone Extension in the test reference packet…
1059 …m conn_handle_id : [in] Connection_Handle to be used to identify a connection.(Range:0x0000-0x0EFF)
1077 * status = 0x01 - 0xFF, if encryption change has failed
1093 * status = 0x01 - 0xFF, if encryption key refresh has failed
1113 …* @brief Indicate that the master device is attempting to encrypt or re-encrypt the link and is r…
1117 * @param ptr_rand_num : [in] A pointer to 64-bit random number.
1118 * @param encrptd_divrsfier : [in] 16-bit encrypted diversifier.
1396 uint32_t sdu_intrv_m_to_s; /* The interval, in us, of periodic SDUs M-> S */
1397 uint32_t sdu_intrv_s_to_m; /* The interval, in us, of periodic SDUs S->M */
1402 uint8_t sca; /* The worst-case sleep clock accuracy of all the slaves */
1510 /* Common parameters of create big and create big test */
1536 uint8_t* codec_config; /* Codec-specific configuration data */
1540 * Octet 3 to 4 Vendor-defined codec ID. (Shall be ignored if octet 0 is not 0xFF.)
1626 /* Exported Definition ------------------------------------------------------*/
2259 * @brief run the LE receiver test.
2268 * @brief run the LE transmitter test.
2280 * @brief end LE test.
2316 /*================ LE receiver Test [v3] Command =====================*/
2318 …* @brief Used to start a test where the DUT receives test reference packets at a fixed interval. …
2327 /*================ LE transmitter Test [v3] Command =====================*/
2329 …* @brief Used to start a test where the DUT generates test reference packets at a fixed interval …
2478 …* @brief allows the Host to read the initial MaxTxOctets and MaxTx-Time values for new connection…
2480 * @param sug_max_tx_octets : [out] used for new connections - connInitialMaxTxOctets.
2481 * @param sug_max_tx_time : [out] used for new connections - connInitialMaxTx-Time.
2491 * @param sug_max_tx_octets : [in] used for new connections - connInitialMaxTxOctets.
2492 * @param sug_max_tx_time : [in] used for new connections - connInitialMaxTx-Time.
2857 …r : [out] A pointer to the min TX power value to be set by the controller [Range: -127 dB to 20 dB]
2858 …nter to the max TX power compensation value to be set by the controller [Range: -127 dB to 20.0 dB]
2868 …RF TX path compensation value to be set by the controller [Range: -128.0 dB (0xFB00) -> 128.0 dB (…
2869 …RF RX path compensation value to be set by the controller [Range: -128.0 dB (0xFB00) -> 128.0 dB (…
2879 …ompnstn : [in] RF TX path compensation value sent by host [Range: -128.0 dB (0xFB00) -> 128.0 dB (…
2880 …ompnstn : [in] RF RX path compensation value sent by host [Range: -128.0 dB (0xFB00) -> 128.0 dB (…
3030 … conn_handle_id : [in] Connection_Handle to be used to identify a connection.(Range:0x0000-0x0EFF)
3055 …m conn_handle_id : [in] Connection_Handle to be used to identify a connection.(Range:0x0000-0x0EFF)
3240 /*================ LE transmitter Test [v4] Command =====================*/
3242 …* @brief Used to start a test where the DUT generates test reference packets at a fixed interval …
3253 /*################# Vendor-Specific HCI Commands' Group ################# */
3341 * @brief Force RTL to re-rx the first sub-event in the stream which is already enabled
3345 …* is generated at the first sub-event of the stream that is already HW Audio signal is…
3544 /*=============== LE Set CIG Parameters Test Command ===============*/
3681 …d_st : pointer to ble_intf_create_big_st that contains the parameters of create big / test command
3687 /*=============== LE Create BIG Test Command ===============*/
3689 …* @brief : (should be used in the ISO Test mode) is used to create a BIG with one or more…
3690 …md_st : pointer to ble_intf_create_big_st that contains the parameters of create big / test command
3788 /*=============== LE ISO Test End Command ===============*/
3790 …or testing purposes) is used to terminate the ISO Transmit and/or Receive Test mode for a CIS or B…
3841 /*=============== LE ISO Tx Test Command ===============*/
3844 * and transmit test payloads which are generated by the Controller
3867 /*=============== LE ISO Rx Test Command ===============*/
3878 /*=============== LE ISO Rx Test Counetrs Command ===============*/
3880 …his command should only be used for testing purposes) is used to read the test counters ) in the C…
3881 * ISO Receive Test mode for a CIS or BIS specified by the Connection_Handle.
3930 * 1. For bare-metal:
3931 * - High ISR is executed in the ISR context
3932 * - Low ISR can be executed in the high ISR context, or switched to low ISR context
3934 * - High ISR is executed in the ISR context
3935 * - Low ISR is executed in the thread of the "linkLayerHighPrioTask"
3937 …* @param allow_low_isr : [in] Configuration parameter for the context of the low ISR in the bare-m…
4073 * from -8196 steps(around -2Mhz) to 8196 steps(around 2Mhz)
4090 * @param packet_payload : DTM pay-load type.
4130 * @brief This function returns the number of packets sent in Direct Test Mode.
4133 * @note the value will not be cleared until the next Direct TX test starts.
4151 * True --> start transmission of free carrier on specific channel
4152 * False --> Stop transmission of free carrier if it is already started
4219 …* @brief Used to save default subrate parameters to be used to test the future incoming subrate re…
4278 * @param options: [In] bit-field to set specific events on
4389 …* @note for non-zero values of pckt_count, DTM start on TX mode will trigger sending packets wit…