6409     hal_wls_processing_input_params_t inputVals;  in proc_csi_event()  local
6416     inputVals.enableCsi              = 1;                  // turn on CSI processing  in proc_csi_event()
6417     inputVals.enableAoA              = AOA_DEFAULT;        // turn on AoA (req. enableCsi==1)  in proc_csi_event()
6418     inputVals.nTx                    = 3;                  // limit # tx streams to process  in proc_csi_event()
6419     inputVals.nRx                    = 3;                  // limit # rx to process  in proc_csi_event()
6420     inputVals.selCal                 = 0;                  // choose cal values  in proc_csi_event()
6421     inputVals.dumpMul                = 0;                  // dump extra peaks in AoA  in proc_csi_event()
6422     inputVals.enableAntCycling       = 0;                  // enable antenna cycling  in proc_csi_event()
6423     inputVals.dumpRawAngle           = 0;                  // Dump Raw Angle  in proc_csi_event()
6424 …inputVals.useToaMin              = TOA_MIN_DEFAULT;    // 1: use min combining, 0: power combining;  in proc_csi_event()
6425     inputVals.useSubspace            = SUBSPACE_DEFAULT;   // 1: use subspace algo; 0: no;  in proc_csi_event()
6426     inputVals.useFindAngleDelayPeaks = ENABLE_DELAY_PEAKS; // use this algorithm for AoA  in proc_csi_event()
6433 …csi((unsigned int *)csiBuffer, (unsigned int *)fftInBuffer_t, &packetparams, &inputVals, resArray);  in proc_csi_event()