168     PRINTM(MCMND, "Supported nss bit map:0x%02x\n", nss_map);  in wlan_get_nss_vht_mcs()
189     PRINTM(MCMND, "Supported nss:%d\n", nss_num);  in wlan_get_nss_num_vht_mcs()
264 …   PRINTM(MERROR, "Configuration of VHT capabilities for TX/RX 3 is not supported in STA mode!\n");  in wlan_11ac_ioctl_vhtcfg()
272 …   PRINTM(MERROR, "Configuration of VHT capabilities for TX/RX %d is not supported in UAP mode!\n",  in wlan_11ac_ioctl_vhtcfg()
310         PRINTM(MINFO, "Set: vht cap info  0x%x\n", usr_vht_cap_info);  in wlan_11ac_ioctl_vhtcfg()
333             PRINTM(MINFO, "Set: vht rx mcs set 0x%08x\n", vht_cfg->vht_rx_mcs);  in wlan_11ac_ioctl_vhtcfg()
353             PRINTM(MINFO, "Set: vht tx mcs set 0x%08x\n", vht_cfg->vht_tx_mcs);  in wlan_11ac_ioctl_vhtcfg()
360                 PRINTM(MINFO, "Set: vht mcs set 0x%08x\n", pmadapter->usr_dot_11ac_mcs_support);  in wlan_11ac_ioctl_vhtcfg()
364                 PRINTM(MINFO, "Skipped user 11ac mcs configuration\n");  in wlan_11ac_ioctl_vhtcfg()
403 …          PRINTM(MINFO, "Get: vht cap info for 2.4GHz 0x%x\n", pmadapter->usr_dot_11ac_dev_cap_bg);  in wlan_11ac_ioctl_vhtcfg()
409 …             PRINTM(MINFO, "Get: vht cap info for 5GHz 0x%x\n", pmadapter->usr_dot_11ac_dev_cap_a);  in wlan_11ac_ioctl_vhtcfg()
414                     PRINTM(MINFO, "Get: invalid band selection for vht cap info\n");  in wlan_11ac_ioctl_vhtcfg()
479             PRINTM(MERROR, "bw or nss NOT supported. HW support bw_160or8080=%d rx_nss=%d.\n",
511         PRINTM(MERROR, "Set operation is not supported\n");
556             PRINTM(MINFO, "GET_HW_SPEC: Maximum MSDU length = 3895 octets\n");
559             PRINTM(MINFO, "GET_HW_SPEC: Maximum MSDU length = 7991 octets\n");
562             PRINTM(MINFO, "GET_HW_SPEC: Maximum MSDU length = 11454 octets\n");
565             PRINTM(MINFO, "Unsupport value\n");
569     PRINTM(MINFO, "GET_HW_SPEC: HTC-VHT %s\n",
571     PRINTM(MINFO, "GET_HW_SPEC: VHT TXOP PS %s\n",
573     PRINTM(MINFO, "GET_HW_SPEC: MU RX beamformee %s\n",
575     PRINTM(MINFO, "GET_HW_SPEC: MU TX beamformee %s\n",
577     PRINTM(MINFO, "GET_HW_SPEC: SU RX Beamformee %s\n",
579     PRINTM(MINFO, "GET_HW_SPEC: SU TX Beamformer %s\n",
581     PRINTM(MINFO, "GET_HW_SPEC: Rx STBC %s\n",
583     PRINTM(MINFO, "GET_HW_SPEC: Tx STBC %s\n",
585     PRINTM(MINFO, "GET_HW_SPEC: Short GI %s for 160MHz BW\n",
587     PRINTM(MINFO, "GET_HW_SPEC: Short GI %s for 80MHz BW\n",
589     PRINTM(MINFO, "GET_HW_SPEC: LDPC coding %s\n",
591     PRINTM(MINFO, "GET_HW_SPEC: Channel BW 20/40/80/160/80+80 MHz %s\n",
593     PRINTM(MINFO, "GET_HW_SPEC: Channel BW 20/40/80/160 MHz %s\n",
612     PRINTM(MINFO, "GET_HW_SPEC: MCSs for %2dx%2d MIMO\n", GET_DEVRXMCSMAP(support),
757     PRINTM(MCMND, "max_rate=%dM\n", max_rate);  in wlan_convert_mcsmap_to_maxrate()
952             PRINTM(MMSG,"No Peer's Ext_cap info\n");
956             PRINTM(MMSG,"Peer don't support Wider Bandwitch in Ext_cap\n");
1143                 PRINTM(MINFO, "Unexpected bandwidth.\n");  in wlan_cmd_append_11ac_tlv()
1173         PRINTM(MINFO, "MLAN bss IOCTL length is too short.\n");