Lines Matching refs:on
11 - eUSB support on EHCI.
12 - Add L1 LPM low power feature on EHCI for device and host.
14 …sb_host_msd_fatfs, usb_device_msc_disk and usb_device_msc_ramdisk examples on the RT1040-EVK, RT10…
19 - Fix on IP3511 driver that SETUP bit is cleared by mistake.
20 - Fix on IP3516 driver that cannot do multiple ISO endpoints transfers at the same time.
21 …- Fix on IP3516 driver that the Token Done interrupt is cleared but the last completed transfer is…
22 - Fix on IP3516 driver that the transfer will continue when receiving a short packet.
23 …- Fix on host audio class driver that entities cannot be distinguished between recorder and speake…
41 - Add the workaround on dev_hid_mouse_bm case for the errata TN00071.
50 - Fix noise issue of UAC 3.1, UAC 5.1, UAC 7.1 on usb audio speaker demo.
52 …- Update the EHCI controller driver to support RW610 that does not reply on PHY driver, especially…
59 …- Add audio multiple channels demo (usb_device_composite_audio_multi_ch_unified) on RT600 audio bo…
60 - Fix audio noise on sync mode and improve overflow/underflow checking method.
61 - Support UAC 3.1, 5.1 and 7.1 on audio speaker demo.
62 - Set USB device CDC demo not to depend on DTR setting from host.
63 - Support MCUX toolchain on some RTxxxx platforms.
119 - Enabled Device Charger Detection (DCD) on RT1060.
120 - Enabled Device Charger Detection on RT600.
121 - Enabled host battery charger function on RT600.
131 - Supported OM13790DOCK on LPCXpresso54018.
133 - Supported multiple transfers for host ISO on IP3516HS.
143 - Enabled USB 3.0 support on device stack.
205 - Supported Device Charger Detect feature on usb_device_hid_mouse.