Lines Matching full:to
76 * Or interrupt might be missed due to the hardware latency
83 * \param[in] clk_divisor: the clock divisor to set.
84 * \param[in] min_delay: SoC-specific HPET minimal delay time to set.
97 * \param[in] state: the power state to be set to the device
103 * \brief Set the timer's comparator. This means when to trigger an interrupt.
104 * \param[in] timer_id: Timer ID to set.
105 * \param[in] value: The value need to set.
111 * \brief Set the timer's main counter to the new value.
112 * \param[in] value: The value need to set.
126 * \param[in] timer_id: Timer ID to enable interrupt.
132 * \param[in] timer_id: Timer ID to enable interrupt.
143 * \brief Set value to the interrupt status to clear.
144 * \param[in] val: val to set to the interrupt status.
150 * \param[in] timer_id: Timer ID to handle.
165 * \param[in] timer_id Timer index to be configured