100 	uint32_t tcr;   /**< Transmission Control Register. */  member
964 	regs->tcr |= SEDI_RBFVM(UART, TCR, RS485_EN, 1);  in sedi_uart_rs485_set_config()
973 	regs->tcr &= ~(SEDI_RBFM(UART, TCR, XFER_MODE));  in sedi_uart_rs485_set_config()
978 		regs->tcr |= (uint32_t)(SEDI_UART_XFER_MODE_HW_HALF_DUPLEX  in sedi_uart_rs485_set_config()
986 		regs->tcr |= (uint32_t)(SEDI_UART_XFER_MODE_FULL_DUPLEX  in sedi_uart_rs485_set_config()
991 	regs->tcr &= ~(SEDI_RBFVM(UART, TCR, RE_POL, 1) | SEDI_RBFVM(UART, TCR, DE_POL, 1));  in sedi_uart_rs485_set_config()
992 	regs->tcr |= (((cfg->re_polarity) << SEDI_RBFO(UART, TCR, RE_POL)) |  in sedi_uart_rs485_set_config()
1001 	regs->tcr &= ~(SEDI_RBFVM(UART, TCR, RS485_EN, 1));  in sedi_uart_rs485_set_config()
1011 	regs->tcr &= ~(SEDI_RBFVM(UART, TCR, RS485_EN, 1));  in sedi_uart_rs485_disable()
1021 	regs->tcr |= SEDI_RBFVM(UART, TCR, RS485_EN, 1);  in sedi_uart_rs485_enable()
1057 		(regs->tcr & SEDI_RBFM(UART, TCR, XFER_MODE)) >> SEDI_RBFO(UART, TCR, XFER_MODE);  in sedi_uart_rs485_get_config()
1059 	if (regs->tcr & (SEDI_RBFO(UART, TCR, DE_POL))) {  in sedi_uart_rs485_get_config()
1065 	if (regs->tcr & (SEDI_RBFO(UART, TCR, RE_POL))) {  in sedi_uart_rs485_get_config()
1083 	regs->tcr |= SEDI_RBFVM(UART, TCR, RS485_EN, 1);  in sedi_uart_rs485_clear_config()
1088 	regs->tcr = 0;  in sedi_uart_rs485_clear_config()
1258 	ctx->tcr = regs->tcr;  in sedi_uart_save_context()
1297 		regs->tcr |= SEDI_RBFVM(UART, TCR, RS485_EN, 1);  in sedi_uart_restore_context()
1302 		regs->tcr = ctx->tcr;  in sedi_uart_restore_context()