Lines Matching refs:payload

23 …equest with a SLIP encoded response packet, including status information and any data as a payload.
55 | 8..n   | Data        | Variable length data payload (0-65535 bytes, as indicated by Size paramete…
78 | 8..n   | Data        | Variable length data payload. Length indicated by "Size" field.           …
84 The final bytes of the Data payload indicate command status:
88 …loader the final two bytes indicate status (most commands return at least a two byte Data payload):
92 …loader the final two bytes indicate status (most commands return at least a two byte Data payload):
284 …DATA`` command packets (like ``FLASH_DEFL_DATA``, ``MEM_DATA``) has the same "data payload" format:
295 | 16-     | "Data to write"          | Length given at beginning of payload.                       …
321 …e host starts by sending SYNC commands. These commands have a large data payload which is also use…
322 …e host starts by sending SYNC commands. These commands have a large data payload which is also use…
347 …payload contains the actual data to write to flash/RAM. In the case of Compressed Flash Downloads,…
376 …the size of data to calculate. The MD5 value is returned in the response payload, before the statu…
388 The SPI _ATTACH command enables the SPI flash interface. It takes a 32-bit data payload which is us…
426 …On {IDF_TARGET_NAME} ROM loader only, there is an additional 4 bytes in the data payload of this c…
451 *  The host sends the READ_FLASH command and the data payload contains the offset, read size, size …
452 *  The stub loader will send a standard response packet, with no additional data payload.
484 Once a full SLIP packet is read, the same bytes - as a SLIP payload with any escaping removed - app…