Lines Matching refs:first

294 …This state prevents the re-run of this app. After the first boot of the new app in the user code, …
298 …Note: If during the first boot a new app the power goes out or the WDT works, then roll back will …
370             partition as this would skip the validation upon first load of the new
644             Build a bootloader which enables Secure Boot on first boot.
673                 Build a bootloader which enables secure boot version 1 on first boot.
680                 Build a bootloader which enables Secure Boot version 2 on first boot.
693 …On first boot, the bootloader will generate a key which is not readable externally or by software.…
697 …Enabling this option means that the bootloader cannot be changed after the first time it is booted.
814             If this option is set, flash contents will be encrypted by the bootloader on first boot.
816 …         Note: After first boot, the system will be permanently encrypted. Re-flashing an encrypted
834 …    This setting is ignored if either type of key is already burned to Efuse before the first boot.
913 … not set (default), the bootloader will permanently disable JTAG (across entire chip) on first boot
939 …        If not set (default, recommended), on first boot the bootloader will burn the WR_DIS_RD_DIS
972 …          first boot. If set, the UART bootloader will still be able to access hardware encryption.
982 …          first boot. If set, the UART bootloader will still be able to access hardware decryption.
994 …              first boot. If set, the UART bootloader will still be able to access the flash cache.
1017 …If not set (default, recommended), on the first boot the bootloader will burn the write-protection…