8 #include <zephyr/drivers/sdhc.h>
32 	return sdhc_request(card->sdhc, &cmd, NULL);  in sd_idle()
60 	ret = sdhc_request(card->sdhc, &cmd, NULL);  in sd_send_interface_condition()
80 	LOG_DBG("Found SDHC with CMD8 support");  in sd_send_interface_condition()
97 	return sdhc_request(card->sdhc, &cmd, NULL);  in sd_enable_crc()
130 	/* SPI requires SDHC PUSH PULL, and open drain buses use more power */  in sd_init_io()
154 	ret = sdhc_set_io(card->sdhc, bus_io);  in sd_init_io()
156 		LOG_ERR("Could not disable card power via SDHC");  in sd_init_io()
161 	ret = sdhc_set_io(card->sdhc, bus_io);  in sd_init_io()
163 		LOG_ERR("Could not disable card power via SDHC");  in sd_init_io()
174 	ret = sdhc_set_io(card->sdhc, bus_io);  in sd_init_io()
241 	card->sdhc = sdhc_dev;  in sd_init()
242 	ret = sdhc_get_host_props(card->sdhc, &card->host_props);  in sd_init()
260 	/* Initialize SDHC IO with defaults */  in sd_init()
285 			LOG_ERR("Failed to reset SDHC I/O");  in sd_init()