Lines Matching +full:output +full:- +full:only

4 # SPDX-License-Identifier: Apache-2.0
46 	  only during provisioning time (controlled environment).
78 	  A 4-byte serial number for the PD.
86 	    - Bit 0-7  : build version number;
87 	    - Bit 8-15 : minor version number;
88 	    - Bit 16-23: major version number;
102 	  - 01: PD monitors and reports the state of the circuit without any
105 	  - 02: Like 01, plus: The PD accepts configuration of the encoding of the
108 	  - 03: Like 02, plus: PD supports supervised monitoring. The operating mode
110 	  - 04: Like 03, plus: the PD supports custom End-Of-Line settings within
121 menu "Output Control"
129 	  - 01: The PD is able to activate and deactivate the Output per direct
131 	  - 02: Like 01, plus: The PD is able to accept configuration of the Output
132 	  driver to set the inactive state of the Output. The typical state of an
133 	  inactive Output is the state of the Output when no power is applied to the
134 	  PD and the output device (relay) is not energized. The inverted drive
135 	  setting causes the PD to energize the Output during the inactive state and
136 	  de-energize the Output during the active state. This feature allows the
137 	  support of "fail-safe/fail-secure" operating modes.
138 	  - 03: Like 01, plus: The PD is able to accept timed commands to the
139 	  Output. A timed command specifies the state of the Output for the
141 	  - 04: Like 02 and 03 - normal/inverted drive and timed operation.
149 endmenu # "Output Control"
159 	  - 01: the PD support on/off control only
160 	  - 02: the PD supports timed commands
161 	  - 03: like 02, plus bi-color LEDs
162 	  - 04: like 02, plus tri-color LEDs
172 menu "Audible Output"
180 	  - 01: the PD support on/off control only
181 	  - 02: the PD supports timed commands
189 endmenu # "Audible Output"
191 menu "Text Output"
199 	  - 00: The PD has no text display support
200 	  - 01: The PD supports 1 row of 16 characters
201 	  - 02: the PD supports 2 rows of 16 characters
202 	  - 03: the PD supports 4 rows of 16 characters
203 	  - 04: TBD.
211 endmenu # "Text Output"
221 	  - 01: the PD sends card data to the CP as array of bits, not exceeding
223 	  - 02: the PD sends card data to the CP as array of BCD characters, not
225 	  - 03: the PD can send card data to the CP as array of bits, or as an
238 	  - 00: The PD does not support time/date functionality
239 	  - 01: The PD understands time/date settings per Command osdp_TDSET
240 	  - 02: The PD is able to locally update the time and date