Lines Matching full:pd
8 # operating as a PD.
13 In PD mode, number of connected PDs is always 1 and cannot
20 The number of commands that can be queued to a given PD. In CP mode,
21 the queue size is multiplied by number of connected PD so this can grow
29 The 7 least significant bits represent the address of the PD to which
30 the message is directed, or the address of the PD sending the reply.
40 Hexadecimal string representation of the 16 byte OSDP PD Secure
41 Channel Base Key. When this field is sent to "NONE", the PD is set to
42 "Install Mode". In this mode, the PD would allow a CP to setup a secure
44 default key, the CP can send a KEYSET command to set new keys to the PD.
45 It is up to the user to make sure that the PD enters the "Install Mode"
53 hex "PD Vendor Code"
60 int "PD Product Model Number"
67 int "PD Product Version"
74 hex "PD Serial Number"
78 A 4-byte serial number for the PD.
81 hex "PD Firmware Version"
90 endmenu # "PD ID Information"
92 menu "OSDP PD Capabilities"
102 - 01: PD monitors and reports the state of the circuit without any
103 supervision. The PD encodes the circuit status per its default
105 - 02: Like 01, plus: The PD accepts configuration of the encoding of the
108 - 03: Like 02, plus: PD supports supervised monitoring. The operating mode
110 - 04: Like 03, plus: the PD supports custom End-Of-Line settings within
129 - 01: The PD is able to activate and deactivate the Output per direct
131 - 02: Like 01, plus: The PD is able to accept configuration of the Output
134 PD and the output device (relay) is not energized. The inverted drive
135 setting causes the PD to energize the Output during the inactive state and
138 - 03: Like 01, plus: The PD is able to accept timed commands to the
159 - 01: the PD support on/off control only
160 - 02: the PD supports timed commands
180 - 01: the PD support on/off control only
181 - 02: the PD supports timed commands
199 - 00: The PD has no text display support
200 - 01: The PD supports 1 row of 16 characters
201 - 02: the PD supports 2 rows of 16 characters
202 - 03: the PD supports 4 rows of 16 characters
221 - 01: the PD sends card data to the CP as array of bits, not exceeding
223 - 02: the PD sends card data to the CP as array of BCD characters, not
225 - 03: the PD can send card data to the CP as array of bits, or as an
238 - 00: The PD does not support time/date functionality
239 - 01: The PD understands time/date settings per Command osdp_TDSET
240 - 02: The PD is able to locally update the time and date
244 endmenu # "OSDP PD Capabilities"