Lines Matching refs:identity

455 	bool "Randomize identity root for fallback identities"
460 	  identity roots (IR). The Host will instead use bt_rand to generate
461 	  identity resolving keys (IRK) and store them in the settings subsystem.
469 	  The IR determines the IRK of the identity. The IRK is used to both
470 	  generate and resolve (recognize) the private addresses of an identity.
472 	  identity.
478 	  Deleting an identity should ideally delete the IRK as well and thereby
486 	  For optimal privacy, a new IRK (i.e., identity) should be used per
487 	  bond. However, this naturally limits advertisements from that identity
492 	  If the application has not setup an identity before calling
495 	  subsystem, and if there are none, set up the default identity
499 	  the address of the default identity. The Host will by default try to
500 	  obtain the IR for that identity from the controller (by Zephyr HCI
505 	  to source the default identity from the static address information
507 	  identity for each entry in Read_Static_Addresses. Setting this config
531 	  Bluetooth identity to use the same Resolvable Private Address in
600 	bool "Delete bond with same peer with other local identity when bonding"
637 	bool "Allow unauthenticated pairing with same peer with other local identity"
642 	  identity. This configuration still blocks unauthenticated pairing
643 	  attempts on the same local identity. To allow the pairing procedure
834 	bool "Perform active scanning using local identity address"
838 	  identity address as the scanner address. By default the stack will
840 	  disclosing local identity information. By not scanning with the
841 	  identity address the scanner will receive directed advertise reports
842 	  for the local identity. If this use case is required, then enable
854 	  If privacy is disabled, the scanner will use its identity
905 	  Maximum number of supported local identity addresses. For most