48 		LOG_DBG("cb is NULL");  in bt_cap_commander_register_cb()
54 		LOG_DBG("callbacks already registered");  in bt_cap_commander_register_cb()
67 		LOG_DBG("cb is NULL");  in bt_cap_commander_unregister_cb()
72 		LOG_DBG("cb is not registered");  in bt_cap_commander_unregister_cb()
94 		LOG_DBG("NULL conn");  in bt_cap_commander_discover()
123 	LOG_DBG("conn %p", (void *)conn);  in cap_commander_broadcast_assistant_add_src_cb()
132 		LOG_DBG("Failed to add source: %d", err);  in cap_commander_broadcast_assistant_add_src_cb()
133 		LOG_DBG("Aborting the proc %d %d", active_proc->proc_done_cnt,  in cap_commander_broadcast_assistant_add_src_cb()
140 		LOG_DBG("Conn %p broadcast source added (%zu/%zu streams done)", (void *)conn,  in cap_commander_broadcast_assistant_add_src_cb()
163 			LOG_DBG("Failed to perform broadcast reception start for conn %p: %d",  in cap_commander_broadcast_assistant_add_src_cb()
179 		LOG_DBG("Failed to register broadcast assistant callbacks: %d", err);  in cap_commander_register_broadcast_assistant_cb()
195 		LOG_DBG("param is NULL");  in valid_broadcast_reception_start_param()
200 		LOG_DBG("Invalid param->count: %zu", param->count);  in valid_broadcast_reception_start_param()
205 		LOG_DBG("param->count (%zu) is larger than CONFIG_BT_MAX_CONN (%d)", param->count,  in valid_broadcast_reception_start_param()
211 		LOG_DBG("param->param is NULL");  in valid_broadcast_reception_start_param()
223 			LOG_DBG("param->param[%zu].member is NULL", i);  in valid_broadcast_reception_start_param()
228 			LOG_DBG("Invalid param->param[%zu].member", i);  in valid_broadcast_reception_start_param()
233 			LOG_DBG("Invalid address type %u", start_param->addr.type);  in valid_broadcast_reception_start_param()
238 			LOG_DBG("param->param[%zu]->adv_sid is larger than %d", i, BT_GAP_SID_MAX);  in valid_broadcast_reception_start_param()
244 			LOG_DBG("param->param[%zu]->pa_interval is out of range", i);  in valid_broadcast_reception_start_param()
249 			LOG_DBG("param->param[%zu]->broadcast_id is larger than %u", i,  in valid_broadcast_reception_start_param()
255 			LOG_DBG("param->param[%zu]->num_subgroups is 0", i);  in valid_broadcast_reception_start_param()
260 			LOG_DBG("Too many subgroups %u/%u", start_param->num_subgroups,  in valid_broadcast_reception_start_param()
267 			LOG_DBG("param->param[%zu]->subgroup is NULL", i);  in valid_broadcast_reception_start_param()
277 				LOG_DBG("param->param[%zu].subgroup[%zu].bis_sync is invalid %u", i,  in valid_broadcast_reception_start_param()
284 				LOG_DBG("param->param[%zu].subgroup[%zu].bis_sync 0x%08X has "  in valid_broadcast_reception_start_param()
295 				LOG_DBG("param->param[%zu].subgroup[%zu].metadata_len too long "  in valid_broadcast_reception_start_param()
306 				LOG_DBG("param->param[%zu].subgroup[%zu].metadata not valid LTV", i,  in valid_broadcast_reception_start_param()
316 				LOG_DBG("param->members[%zu] (%p) is duplicated by "  in valid_broadcast_reception_start_param()
337 		LOG_DBG("A CAP procedure is already in progress");  in bt_cap_commander_broadcast_reception_start()
351 		LOG_DBG("Failed to register broadcast assistant callbacks");  in bt_cap_commander_broadcast_reception_start()
366 			LOG_DBG("Invalid param->members[%zu]", i);  in bt_cap_commander_broadcast_reception_start()
397 		LOG_DBG("Failed to start broadcast reception for conn %p: %d", (void *)conn, err);  in bt_cap_commander_broadcast_reception_start()
431 		LOG_DBG("BASS recv state: conn %p, src_id %u", (void *)conn, state->src_id);  in cap_commander_broadcast_assistant_recv_state_cb()
444 		LOG_DBG("Removing source for conn %p", (void *)conn);  in cap_commander_broadcast_assistant_recv_state_cb()
447 			LOG_DBG("Failed to rem_src for conn %p: %d", (void *)conn, err);  in cap_commander_broadcast_assistant_recv_state_cb()
465 		LOG_DBG("Failed removing source: %d", err);  in cap_commander_broadcast_assistant_rem_src_cb()
466 		LOG_DBG("Aborting the proc %d %d", active_proc->proc_done_cnt,  in cap_commander_broadcast_assistant_rem_src_cb()
473 		LOG_DBG("Conn %p broadcast source removed (%zu/%zu streams done)", (void *)conn,  in cap_commander_broadcast_assistant_rem_src_cb()
495 			LOG_DBG("Failed to mod_src for conn %p: %d", (void *)conn, err);  in cap_commander_broadcast_assistant_rem_src_cb()
514 		LOG_DBG("Failed modifying source: %d", err);  in cap_commander_broadcast_assistant_mod_src_cb()
515 		LOG_DBG("Aborting the proc %d %d", active_proc->proc_done_cnt,  in cap_commander_broadcast_assistant_mod_src_cb()
520 		LOG_DBG("Conn %p broadcast source modifified (%zu/%zu streams done)", (void *)conn,  in cap_commander_broadcast_assistant_mod_src_cb()
535 		LOG_DBG("param is NULL");  in valid_broadcast_reception_stop_param()
540 		LOG_DBG("Invalid param->count: %zu", param->count);  in valid_broadcast_reception_stop_param()
545 		LOG_DBG("param->count (%zu) is larger than CONFIG_BT_MAX_CONN (%d)", param->count,  in valid_broadcast_reception_stop_param()
551 		LOG_DBG("param->param is NULL");  in valid_broadcast_reception_stop_param()
563 			LOG_DBG("param->param[%zu].member is NULL", i);  in valid_broadcast_reception_stop_param()
568 			LOG_DBG("Invalid param->param[%zu].member", i);  in valid_broadcast_reception_stop_param()
573 			LOG_DBG("param->param[%zu]->num_subgroups is 0", i);  in valid_broadcast_reception_stop_param()
578 			LOG_DBG("Too many subgroups %u/%u", stop_param->num_subgroups,  in valid_broadcast_reception_stop_param()
588 				LOG_DBG("param->members[%zu], src_id %d (%p) is duplicated by "  in valid_broadcast_reception_stop_param()
609 		LOG_DBG("A CAP procedure is already in progress");  in bt_cap_commander_broadcast_reception_stop()
625 		LOG_DBG("Failed to register broadcast assistant callbacks");  in bt_cap_commander_broadcast_reception_stop()
640 			LOG_DBG("Invalid param->member[%zu]", i);  in bt_cap_commander_broadcast_reception_stop()
666 		LOG_DBG("Failed to stop broadcast reception for conn %p: %d", (void *)conn, err);  in bt_cap_commander_broadcast_reception_stop()
678 	LOG_DBG("conn %p", (void *)conn);  in cap_commander_broadcast_assistant_set_broadcast_code_cb()
686 		LOG_DBG("Failed to distribute broadcast code: %d", err);  in cap_commander_broadcast_assistant_set_broadcast_code_cb()
692 		LOG_DBG("Conn %p broadcast code set (%zu/%zu done)", (void *)conn,  in cap_commander_broadcast_assistant_set_broadcast_code_cb()
715 			LOG_DBG("Failed to perform set broadcast code for conn %p: %d",  in cap_commander_broadcast_assistant_set_broadcast_code_cb()
729 		LOG_DBG("param is NULL");  in valid_distribute_broadcast_code_param()
734 		LOG_DBG("Invalid param->count: %zu", param->count);  in valid_distribute_broadcast_code_param()
739 		LOG_DBG("param->count (%zu) is larger than CONFIG_BT_MAX_CONN (%d)", param->count,  in valid_distribute_broadcast_code_param()
745 		LOG_DBG("param->param is NULL");  in valid_distribute_broadcast_code_param()
755 			LOG_DBG("param->param[%zu].member is NULL", i);  in valid_distribute_broadcast_code_param()
760 			LOG_DBG("Invalid param->param[%zu].member", i);  in valid_distribute_broadcast_code_param()
770 				LOG_DBG("param->param[%zu].member.member (%p) is duplicated by "  in valid_distribute_broadcast_code_param()
790 		LOG_DBG("A CAP procedure is already in progress");  in bt_cap_commander_distribute_broadcast_code()
805 		LOG_DBG("Failed to register broadcast assistant callbacks");  in bt_cap_commander_distribute_broadcast_code()
820 			LOG_DBG("Invalid param->member[%zu]", i);  in bt_cap_commander_distribute_broadcast_code()
846 		LOG_DBG("Failed to start distribute broadcast code for conn %p: %d", (void *)conn,  in bt_cap_commander_distribute_broadcast_code()
933 		LOG_DBG("No CAP procedure is in progress");  in bt_cap_commander_cancel()
954 		LOG_DBG("Failed to register VCP callbacks: %d", err);  in cap_commander_register_vcp_cb()
967 		LOG_DBG("param is NULL");  in valid_change_volume_param()
972 		LOG_DBG("Invalid param->count: %u", param->count);  in valid_change_volume_param()
977 		LOG_DBG("param->members is NULL");  in valid_change_volume_param()
982 		LOG_DBG("param->count (%zu) is larger than CONFIG_BT_MAX_CONN (%d)", param->count,  in valid_change_volume_param()
993 			LOG_DBG("param->members[%zu] is NULL", i);  in valid_change_volume_param()
998 			LOG_DBG("Invalid param->members[%zu]", i);  in valid_change_volume_param()
1003 			LOG_DBG("Volume control not available for param->members[%zu]", i);  in valid_change_volume_param()
1011 				LOG_DBG("param->members[%zu] (%p) is duplicated by "  in valid_change_volume_param()
1028 	LOG_DBG("vol_ctlr %p", (void *)vol_ctlr);  in cap_commander_vcp_vol_set_cb()
1036 	LOG_DBG("conn %p", (void *)conn);  in cap_commander_vcp_vol_set_cb()
1043 		LOG_DBG("Failed to set volume: %d", err);  in cap_commander_vcp_vol_set_cb()
1048 		LOG_DBG("Conn %p volume updated (%zu/%zu streams done)", (void *)conn,  in cap_commander_vcp_vol_set_cb()
1053 		LOG_DBG("Proc is aborted");  in cap_commander_vcp_vol_set_cb()
1055 			LOG_DBG("All handled");  in cap_commander_vcp_vol_set_cb()
1071 			LOG_DBG("Failed to set volume for conn %p: %d", (void *)conn, err);  in cap_commander_vcp_vol_set_cb()
1088 		LOG_DBG("A CAP procedure is already in progress");  in bt_cap_commander_change_volume()
1101 		LOG_DBG("Failed to register VCP callbacks");  in bt_cap_commander_change_volume()
1113 			LOG_DBG("Invalid param->members[%zu]", i);  in bt_cap_commander_change_volume()
1130 		LOG_DBG("Failed to set volume for conn %p: %d", (void *)conn, err);  in bt_cap_commander_change_volume()
1141 		LOG_DBG("param is NULL");  in valid_change_volume_mute_state_param()
1146 		LOG_DBG("Invalid param->count: %u", param->count);  in valid_change_volume_mute_state_param()
1151 		LOG_DBG("param->members is NULL");  in valid_change_volume_mute_state_param()
1156 		LOG_DBG("param->count (%zu) is larger than CONFIG_BT_MAX_CONN (%d)", param->count,  in valid_change_volume_mute_state_param()
1167 			LOG_DBG("param->members[%zu] is NULL", i);  in valid_change_volume_mute_state_param()
1172 			LOG_DBG("Invalid param->members[%zu]", i);  in valid_change_volume_mute_state_param()
1177 			LOG_DBG("Volume control not available for param->members[%zu]", i);  in valid_change_volume_mute_state_param()
1185 				LOG_DBG("param->members[%zu] (%p) is duplicated by "  in valid_change_volume_mute_state_param()
1202 	LOG_DBG("vol_ctlr %p", (void *)vol_ctlr);  in cap_commander_vcp_vol_mute_cb()
1210 	LOG_DBG("conn %p", (void *)conn);  in cap_commander_vcp_vol_mute_cb()
1217 		LOG_DBG("Failed to set volume: %d", err);  in cap_commander_vcp_vol_mute_cb()
1222 		LOG_DBG("Conn %p volume updated (%zu/%zu streams done)", (void *)conn,  in cap_commander_vcp_vol_mute_cb()
1227 		LOG_DBG("Proc is aborted");  in cap_commander_vcp_vol_mute_cb()
1229 			LOG_DBG("All handled");  in cap_commander_vcp_vol_mute_cb()
1249 			LOG_DBG("Failed to set volume for conn %p: %d", (void *)conn, err);  in cap_commander_vcp_vol_mute_cb()
1267 		LOG_DBG("A CAP procedure is already in progress");  in bt_cap_commander_change_volume_mute_state()
1281 		LOG_DBG("Failed to register VCP callbacks");  in bt_cap_commander_change_volume_mute_state()
1293 			LOG_DBG("Invalid param->members[%zu]", i);  in bt_cap_commander_change_volume_mute_state()
1315 		LOG_DBG("Failed to set volume mute state for conn %p: %d", (void *)conn, err);  in bt_cap_commander_change_volume_mute_state()
1327 		LOG_DBG("param is NULL");  in valid_change_offset_param()
1332 		LOG_DBG("Invalid param->count: %u", param->count);  in valid_change_offset_param()
1337 		LOG_DBG("param->param is NULL");  in valid_change_offset_param()
1342 		LOG_DBG("param->count (%zu) is larger than CONFIG_BT_MAX_CONN (%d)", param->count,  in valid_change_offset_param()
1358 			LOG_DBG("param->param[%zu].member is NULL", i);  in valid_change_offset_param()
1363 			LOG_DBG("Invalid param->param[%zu].member", i);  in valid_change_offset_param()
1369 			LOG_DBG("Volume control not available for param->param[%zu].member", i);  in valid_change_offset_param()
1375 			LOG_DBG("Volume offset control not available for param->param[%zu].member",  in valid_change_offset_param()
1381 			LOG_DBG("Invalid offset %d for param->param[%zu].offset",  in valid_change_offset_param()
1390 				LOG_DBG("param->param[%zu].member (%p) is duplicated by "  in valid_change_offset_param()
1407 	LOG_DBG("bt_vocs %p", (void *)inst);  in cap_commander_vcp_set_offset_cb()
1415 	LOG_DBG("conn %p", (void *)conn);  in cap_commander_vcp_set_offset_cb()
1422 		LOG_DBG("Failed to set offset: %d", err);  in cap_commander_vcp_set_offset_cb()
1427 		LOG_DBG("Conn %p offset updated (%zu/%zu streams done)", (void *)conn,  in cap_commander_vcp_set_offset_cb()
1432 		LOG_DBG("Proc is aborted");  in cap_commander_vcp_set_offset_cb()
1434 			LOG_DBG("All handled");  in cap_commander_vcp_set_offset_cb()
1451 			LOG_DBG("Failed to set offset for conn %p: %d", (void *)conn, err);  in cap_commander_vcp_set_offset_cb()
1470 		LOG_DBG("A CAP procedure is already in progress");  in bt_cap_commander_change_volume_offset()
1483 		LOG_DBG("Failed to register VCP callbacks");  in bt_cap_commander_change_volume_offset()
1498 			LOG_DBG("Invalid param->members[%zu]", i);  in bt_cap_commander_change_volume_offset()
1504 			LOG_DBG("Invalid param->members[%zu] vol_ctlr", i);  in bt_cap_commander_change_volume_offset()
1510 			LOG_DBG("Invalid param->members[%zu] vocs", i);  in bt_cap_commander_change_volume_offset()
1531 		LOG_DBG("Failed to set volume for conn %p: %d", (void *)conn, err);  in bt_cap_commander_change_volume_offset()
1550 		LOG_DBG("Failed to register MICP callbacks: %d", err);  in cap_commander_register_micp_callbacks()
1564 		LOG_DBG("param is NULL");  in valid_change_microphone_mute_state_param()
1569 		LOG_DBG("Invalid param->count: %u", param->count);  in valid_change_microphone_mute_state_param()
1574 		LOG_DBG("param->members is NULL");  in valid_change_microphone_mute_state_param()
1579 		LOG_DBG("param->count (%zu) is larger than CONFIG_BT_MAX_CONN (%d)", param->count,  in valid_change_microphone_mute_state_param()
1590 			LOG_DBG("param->members[%zu] is NULL", i);  in valid_change_microphone_mute_state_param()
1595 			LOG_DBG("Invalid param->members[%zu]", i);  in valid_change_microphone_mute_state_param()
1600 			LOG_DBG("Microphone control not available for param->members[%zu]", i);  in valid_change_microphone_mute_state_param()
1608 				LOG_DBG("param->members[%zu] (%p) is duplicated by "  in valid_change_microphone_mute_state_param()
1625 	LOG_DBG("mic_ctlr %p", (void *)mic_ctlr);  in cap_commander_micp_mic_mute_cb()
1633 	LOG_DBG("conn %p", (void *)conn);  in cap_commander_micp_mic_mute_cb()
1640 		LOG_DBG("Failed to change microphone mute: %d", err);  in cap_commander_micp_mic_mute_cb()
1645 		LOG_DBG("Conn %p mute updated (%zu/%zu streams done)", (void *)conn,  in cap_commander_micp_mic_mute_cb()
1650 		LOG_DBG("Proc is aborted");  in cap_commander_micp_mic_mute_cb()
1652 			LOG_DBG("All handled");  in cap_commander_micp_mic_mute_cb()
1672 			LOG_DBG("Failed to change mute for conn %p: %d", (void *)conn, err);  in cap_commander_micp_mic_mute_cb()
1690 		LOG_DBG("A CAP procedure is already in progress");  in bt_cap_commander_change_microphone_mute_state()
1704 		LOG_DBG("Failed to register MICP callbacks");  in bt_cap_commander_change_microphone_mute_state()
1716 			LOG_DBG("Invalid param->members[%zu]", i);  in bt_cap_commander_change_microphone_mute_state()
1738 		LOG_DBG("Failed to set microphone mute state for conn %p: %d", (void *)conn, err);  in bt_cap_commander_change_microphone_mute_state()
1750 		LOG_DBG("param is NULL");  in valid_change_microphone_gain_param()
1755 		LOG_DBG("Invalid param->count: %u", param->count);  in valid_change_microphone_gain_param()
1760 		LOG_DBG("param->param is NULL");  in valid_change_microphone_gain_param()
1765 		LOG_DBG("param->count (%zu) is larger than CONFIG_BT_MAX_CONN (%d)", param->count,  in valid_change_microphone_gain_param()
1779 			LOG_DBG("param->param[%zu].member is NULL", i);  in valid_change_microphone_gain_param()
1784 			LOG_DBG("Invalid param->param[%zu].member", i);  in valid_change_microphone_gain_param()
1790 			LOG_DBG("Microphone control not available for param->param[%zu].member", i);  in valid_change_microphone_gain_param()
1796 			LOG_DBG("Microphone audio input control not available for "  in valid_change_microphone_gain_param()
1806 				LOG_DBG("param->param[%zu].member (%p) is duplicated by "  in valid_change_microphone_gain_param()
1823 	LOG_DBG("bt_aics %p", (void *)inst);  in cap_commander_micp_gain_set_cb()
1831 	LOG_DBG("conn %p", (void *)conn);  in cap_commander_micp_gain_set_cb()
1838 		LOG_DBG("Failed to set gain: %d", err);  in cap_commander_micp_gain_set_cb()
1843 		LOG_DBG("Conn %p gain updated (%zu/%zu streams done)", (void *)conn,  in cap_commander_micp_gain_set_cb()
1848 		LOG_DBG("Proc is aborted");  in cap_commander_micp_gain_set_cb()
1850 			LOG_DBG("All handled");  in cap_commander_micp_gain_set_cb()
1865 			LOG_DBG("Failed to set gain for conn %p: %d", (void *)conn, err);  in cap_commander_micp_gain_set_cb()
1883 		LOG_DBG("A CAP procedure is already in progress");  in bt_cap_commander_change_microphone_gain_setting()
1896 		LOG_DBG("Failed to register MICP callbacks");  in bt_cap_commander_change_microphone_gain_setting()
1910 			LOG_DBG("Invalid param->param[%zu].member", i);  in bt_cap_commander_change_microphone_gain_setting()
1916 			LOG_DBG("Invalid param->param[%zu].member mic_ctlr", i);  in bt_cap_commander_change_microphone_gain_setting()
1922 			LOG_DBG("Invalid param->param[%zu].member aics", i);  in bt_cap_commander_change_microphone_gain_setting()
1943 		LOG_DBG("Failed to set gain for conn %p: %d", (void *)conn, err);  in bt_cap_commander_change_microphone_gain_setting()