Lines Matching full:is
18 Set if the Back-Up Real Time Counter (BURTC) HAL module is used.
24 Set if the Core interrupt handling (CORE) HAL module is used.
29 Set if the Analog comparator (ACMP) HAL module is used.
34 Set if the Analog to Digital Converter (ADC) HAL module is used.
39 Set if the Incremental Analog to Digital Converter (IADC) HAL module is used.
44 Set if the Ultra Low Energy Timer/Counter (CRYOTIMER) HAL module is used.
49 Set if the Energy Management Unit (EMU) HAL module is used.
54 Set if the General Purpose Input/Output (GPIO) HAL module is used.
59 Set if the Inter-Integrated Circuit Interface (I2C) HAL module is used.
64 Set if the Low Energy Timer (LETIMER) HAL module is used.
70 HAL module is used.
75 Set if the Linked Direct Memory Access (LDMA) HAL module is used.
80 Set if the Memory System Controller (MSC) HAL module is used.
85 Set if the Peripheral Reflex System (PRS) HAL module is used.
90 Set if the Reset Management Unit (RMU) HAL module is used.
95 Set if the Real Time Counter (RTC) HAL module is used.
100 Set if the Real Time Counter and Calendar (RTCC) HAL module is used.
105 Set if the Secure Element (SE) HAL module is used.
110 Set if the Timer/Counter (TIMER) HAL module is used.
116 HAL module is used.
122 HAL module is used.
127 Set if the Watchdog Timer (WDOG) HAL module is used.
139 Set if the Sleeptimer HAL module is used.
145 Set if the HFXO Manager HAL module is used.
214 Set if the clock management unit (CMU) is present in the SoC.
222 in on-demand mode, after SoC is initialized.
277 locations. This is supported by e.g. efr32fg1p, efr32mg12p series.
279 This is supported by e.g. efm32hg, efm32wg series.
284 Set if the SoC is affected by errata RTCC_E201:
285 "When the RTCC is configured with a prescaler, the CCV1 top value enable
287 when RTCC_CNT is equal to RTCC_CC1_CCV, as intended."
292 If enabled, indicates that configuration of HFRCO frequency for this SOC is supported
293 via FREQRANGE field. This is supported for e.g. efr32fg1p, efr32mg12p series.
295 is not supported via this field. This is the case for e.g. efm32hg, efm32wg series.
306 RAIL (Radio Abstraction Interface Layer) is a library needed to use the EFR radio