Lines Matching full:sleep

22  * | Sleep       | On    | On    | Stop    | Stop   | Preserved  | On  | On   |
23  * | Deep Sleep  | On    | Stop  | Stop    | Stop   | Power Down | On  | On   |
32  * - A delay of 'Instant' wake-up from 'Deep Sleep' is 20 us.
33  * - A delay of 'Standard' wake-up from 'Deep Sleep' is 3.43 ms.
34  * - Max residency time in Deep Sleep for 'Instant' wake-up is 200 ms
35  * - Min Residency time in Deep Sleep for 'Instant' wake-up is 61 us
40  * Sub-state 0 - "Deep Sleep" mode with “Instant” wake-up if residency time
42  * Sub-state 1 - "Deep Sleep" mode with "Standard" wake-up if residency time
62 /* The steps that npcx ec enters sleep/deep mode and leaves it. */
66 	"wfi\n"              /* Enter sleep mode after receiving wfi */        \
77 /* Supported sleep mode in npcx series */
104  * save power consumption when ec enter deep sleep.
151 	/* Configure sleep/deep sleep settings in clock control module. */  in npcx_power_enter_system_sleep()
173 	 * enters system sleep mode.  in npcx_power_enter_system_sleep()
177 	/* Enter system sleep mode */  in npcx_power_enter_system_sleep()
182 	 * system sleep mode.  in npcx_power_enter_system_sleep()
197 	/* Turn off system sleep mode. */  in npcx_power_enter_system_sleep()
208 		case 0:	/* Sub-state 0: Deep sleep with instant wake-up */  in pm_state_set()
215 		case 1:	/* Sub-state 1: Deep sleep with standard wake-up */  in pm_state_set()
237 		case 0:	/* Sub-state 0: Deep sleep with instant wake-up */  in pm_state_exit_post_ops()
241 		case 1:	/* Sub-state 1: Deep sleep with standard wake-up */  in pm_state_exit_post_ops()
253 		LOG_DBG("sleep: %d, deep sleep: %d", cnt_sleep0, cnt_sleep1);  in pm_state_exit_post_ops()
254 		LOG_INF("total ticks in sleep: %lld",  in pm_state_exit_post_ops()