Lines Matching full:upstream

195  * and cleared by HW when FW writes to upstream completion control register
227  * Completion data received for upstream non-posted read.
237  * Completion SAI received for upstream non-posted message.
251  * Completion status received for upstream non-posted message
267  * Completion EH present indication received for upstream non-posted message.
298  * Upstream Status
299  * Status register for upstream message.
317  * Upstream message sent interrupt status. Set by HW when upstream message has been
330  * Upstream Command
331  * Command register for upstream message.
341  * read as 0 but FW can write it to 1 to start the upstream transaction. In that way
384  * Upstream Lower Address
385  * Address register (lower 32 bits) for upstream message.
396  * Upstream Upper Address
397  * Address register (upper 32 bits) for upstream message.
430  * Upstream Data
431  * Transmit data register for upstream message.
441  * Upstream Attributes
442  * Attribute register for upstream message.
492  * Upstream SAI
493  * Extended header (SAI / RS) register for upstream message.
538  * Upstream Completion Data
548  * Upstream Completion Control & Status
575  * original message is posted then upstream completion is not generated by HW. This
582  * Upstream completion SAI
731  * BOOTPREPACK message on the upstream path of SBEP HW. SBEP HW will clear this bit,
765  * @brief Configure attributes of upstream message
783  * @brief Set 16bit address for upstream message.
794  * @brief Set transmit data for upstream message.