Lines Matching +full:peripheral +full:- +full:in

2  * Copyright (c) 2016-2017 Piotr Mienkowski
3  * Copyright (c) 2020-2022 Gerson Fernando Budke
4  * SPDX-License-Identifier: Apache-2.0
27 /* Open-Drain is a reserved entry at pinctrl driver */
29 /* Input-Enable means Input-Buffer, see dts/pinctrl/pincfg-node.yaml */
32 /* Output-Enable, see dts/pinctrl/pincfg-node.yaml */
35 /* Drive-Strength, 0mA means normal, any other value means stronger */
38 /* Peripheral Multiplexer Enable */
46 /** Connect pin to peripheral A. */
48 /** Connect pin to peripheral B. */
50 /** Connect pin to peripheral C. */
52 /** Connect pin to peripheral D. */
54 /** Connect pin to peripheral E. */
56 /** Connect pin to peripheral F. */
58 /** Connect pin to peripheral G. */
60 /** Connect pin to peripheral H. */
62 /** Connect pin to peripheral I. */
64 /** Connect pin to peripheral J. */
66 /** Connect pin to peripheral K. */
68 /** Connect pin to peripheral L. */
70 /** Connect pin to peripheral M. */
72 /** Connect pin to peripheral N. */
97  * - configure pin(s) as input.
98  * - connect pin(s) to a peripheral B and enable pull-up.
104  * PORT is powered up again), the latches in the pads will keep their current
107  * configuration in and out of BACKUP mode.  The PORT peripheral will continue
108  * operating in any Sleep mode where its source clock is running.
117  * Configure an arbitrary amount of pins in an arbitrary way.  Each
118  * configuration entry is a single item in an array passed as an argument to