Lines Matching +full:open +full:- +full:wire
1 .. zephyr:code-sample:: ds18b20
2 :name: DS18B20 1-Wire Temperature Sensor
3 :relevant-api: sensor_interface w1_sensor
11 `DS18B20`_ 1-Wire temperature sensor.
31 https://www.analog.com/media/en/technical-documentation/data-sheets/ds18b20.pdf
33 Boards with a built-in DS18B20 or a board-specific overlay
40 .. zephyr-app-commands::
41 :zephyr-app: samples/sensor/ds18b20
48 Make sure that you have an external circuit to provide an open-drain interface
49 for the 1-Wire bus.
51 to the 1-Wire bus, build and flash with:
53 .. zephyr-app-commands::
54 :zephyr-app: samples/sensor/ds18b20
56 :gen-args: -DDTC_OVERLAY_FILE=arduino_serial.overlay
59 should work on any board with a properly configured Arduino pin-compatible Serial
72 .. code-block:: none
74 *** Booting Zephyr OS build zephyr-v2.6.0-1929-gf7abe4a6689e ***
76 [00:00:00.000,039] <dbg> w1_serial: w1_serial_init: w1-serial initialized, with 1 devices