Lines Matching +full:5 +full:a
5 Control a BBLED (Breathing-Blinking LED) using Microchip XEC driver.
20 MEC172x has a fourth instance of BBLED:
41 - Connect GPIO 0156 to board LED4 by placing a wire from JP71-11 to J47-3.
42 - Make sure there are no jumpers on JP54 1-2 and JP21 4-5
45 - Connect GPIO 0156 to board LED5 by placing a wire from JP71-12 to J48-3.
49 - Connect GPIO 0153 to board LED7 by placing a wire from JP71-5 to JP146-5.
51 JP146-5 is connected to MEC172x VCI_OUT1 without a jumper. Force VCI_OUT1
53 to the VBAT rail via a 100K pull-up. Requires VBAT power rail is connected
57 - Connect GPIO 0035 to board LED7 by placing a wire from JP67-19 to JP146-1.
60 JP146-1 is connected to MEC172x VCI_OUT2 without a jumper. Force VCI_OUT2
61 high by forcing VCI_IN2 high: install a jumper on J55 5-6 which pulls VCI_IN2
62 to the VBAT rail via a 100K pull-up. Requires VBAT power rail is connected