Lines Matching +full:output +full:- +full:only

1 .. zephyr:code-sample:: esp32-deep-sleep
14 make use of that pre-configured wake up source to bring the system back again.
23 3. ``GPIO``: Only supported by some Espressif SoCs, in the case of ESP32-C3
24    GPIOS0~5 can be used as wake-up sources.
26 In this demo, Timer is the only wake-up source that cannot be disabled via a
28 as wake-up source, deep sleep for 20 seconds, wake up.
35 only ``Timer`` is used as wakeup source.
37 However, when ``EXT1`` is also enabled, GPIO2 and GPIO4 should be pulled-down
43 enabled as wake-up source.
52 .. zephyr-app-commands::
53    :zephyr-app: samples/boards/espressif/deep_sleep
58 Sample Output
60 ESP32 core output
61 -----------------
63 With both wake up sources enabled, the console output will be as below. The
64 reset reason message depends on the wake up source used. The console output
67 .. code-block:: console
69    *** Booting Zephyr OS build zephyr-v3.1.0-3667-gb42e2b225ecf  ***