Lines Matching +full:in +full:- +full:application

1 .. zephyr:code-sample:: ble_direction_finding_connectionless_rx
3    :relevant-api: bt_gap bluetooth
10 A simple application demonstrating the Bluetooth LE Direction Finding CTE Locator
27 By default the application supports Angle of Arrival and Angle of Departure mode.
29 To use Angle of Departure mode only, build this application as follows,
32 .. zephyr-app-commands::
33    :zephyr-app: samples/bluetooth/direction_finding_connectionless_rx
34    :host-os: unix
36    :gen-args: -DEXTRA_CONF_FILE=overlay-aod.conf
40 To run the application on nRF5340DK, a Bluetooth controller application must
41 also run on the network core. The :zephyr:code-sample:`bluetooth_hci_ipc` sample
42 application may be used. To build this sample with direction finding support
49 * Make sure the same GPIO pins are assigned to Direction Finding Extension in file
51 …as those in the created file :file:`samples/bluetooth/hci_ipc/boards/nrf5340dk_nrf5340_cpunet.over…
64 configuration must be provided via :ref:`devicetree <dt-guide>` to enable
67 An example devicetree overlay is in
70 own board-specific overlay in the same directory for a different board. See
71 :dtcompatible:`nordic,nrf-radio` for documentation on the properties used in
72 this overlay. See :ref:`set-devicetree-overlays` for information on setting up
76 network core application. When :zephyr:code-sample:`bluetooth_hci_ipc` is used as the
77 network core application, the antenna matrix configuration should be stored in