Lines Matching +full:vcc +full:- +full:3
2 * Copyright 2022-2023 NXP
4 * SPDX-License-Identifier: Apache-2.0
32 SD_SEND_RELATIVE_ADDR = 3,
33 MMC_SEND_RELATIVE_ADDR = 3,
69 * to inform the SD card the next command is an application-specific one.
87 /* Bits 0-2 reserved */
88 SD_R1_AUTH_ERR = BIT(3),
99 /* Bits 17-18 reserved */
142 SDMMC_R1_STANDBY = 3U,
159 SD_SPI_R1CMD_CRC_ERR = BIT(3),
184 #define SD_SPI_CMD_BODY_SIZE (SD_SPI_CMD_SIZE - 1)
219 SD_RSP_TYPE_R2 = 3U,
229 SD_SPI_RSP_TYPE_R2 = (3U << 4),
244 SD_SDHC_FLAG = BIT(3),
271 /** VDD 2.7-2.8 */
273 /** VDD 2.8-2.9 */
275 /** VDD 2.9-3.0 */
277 /** VDD 3.0-3.1 */
279 /** VDD 3.1-3.2 */
281 /** VDD 3.2-3.3 */
283 /** VDD 3.3-3.4 */
285 /** VDD 3.4-3.5 */
287 /** VDD 3.5-3.6 */
320 SDIO_OCR_VDD20_21FLAG = BIT(8), /*!< VDD 2.0-2.1 */
321 SDIO_OCR_VDD21_22FLAG = BIT(9), /*!< VDD 2.1-2.2 */
322 SDIO_OCR_VDD22_23FLAG = BIT(10), /*!< VDD 2.2-2.3 */
323 SDIO_OCR_VDD23_24FLAG = BIT(11), /*!< VDD 2.3-2.4 */
324 SDIO_OCR_VDD24_25FLAG = BIT(12), /*!< VDD 2.4-2.5 */
325 SDIO_OCR_VDD25_26FLAG = BIT(13), /*!< VDD 2.5-2.6 */
326 SDIO_OCR_VDD26_27FLAG = BIT(14), /*!< VDD 2.6-2.7 */
327 SDIO_OCR_VDD27_28FLAG = BIT(15), /*!< VDD 2.7-2.8 */
328 SDIO_OCR_VDD28_29FLAG = BIT(16), /*!< VDD 2.8-2.9 */
329 SDIO_OCR_VDD29_30FLAG = BIT(17), /*!< VDD 2.9-3.0 */
330 SDIO_OCR_VDD30_31FLAG = BIT(18), /*!< VDD 2.9-3.0 */
331 SDIO_OCR_VDD31_32FLAG = BIT(19), /*!< VDD 3.0-3.1 */
332 SDIO_OCR_VDD32_33FLAG = BIT(20), /*!< VDD 3.1-3.2 */
333 SDIO_OCR_VDD33_34FLAG = BIT(21), /*!< VDD 3.2-3.3 */
334 SDIO_OCR_VDD34_35FLAG = BIT(22), /*!< VDD 3.3-3.4 */
335 SDIO_OCR_VDD35_36FLAG = BIT(23), /*!< VDD 3.4-3.5 */
367 SD_GRP_CURRENT_LIMIT_MODE = 3U,
398 UHS_SDR104_BUS_SPEED = BIT(3),
420 SD_TIMING_SDR104 = 3U,
452 SD_SET_CURRENT_800MA = 3,
468 SD_MAX_CURRENT_800MA = BIT(3),
496 SD_DRV_STRENGTH_TYPED = 3U,
544 /** Data read access-time-1 [119:112] */
546 /** Data read access-time-2 in clock cycles (NSAC*100) [111:104] */
589 MMC_MAXFREQ_100MHZ = 3U << 0U,
590 MMC_MAXFREQ_MULT_10 = 1U << 3U,
591 MMC_MAXFREQ_MULT_12 = 2U << 3U,
592 MMC_MAXFREQ_MULT_13 = 3U << 3U,
593 MMC_MAXFREQ_MULT_15 = 4U << 3U,
594 MMC_MAXFREQ_MULT_20 = 5U << 3U,
595 MMC_MAXFREQ_MULT_26 = 6U << 3U,
596 MMC_MAXFREQ_MULT_30 = 7U << 3U,
597 MMC_MAXFREQ_MULT_35 = 8U << 3U,
598 MMC_MAXFREQ_MULT_40 = 9U << 3U,
599 MMC_MAXFREQ_MULT_45 = 0xAU << 3U,
600 MMC_MAXFREQ_MULT_52 = 0xBU << 3U,
601 MMC_MAXFREQ_MULT_55 = 0xCU << 3U,
602 MMC_MAXFREQ_MULT_60 = 0xDU << 3U,
603 MMC_MAXFREQ_MULT_70 = 0xEU << 3U,
604 MMC_MAXFREQ_MULT_80 = 0xFU << 3u
616 MMC_HS400_TIMING = 3U
628 mmc_driv_type3 = 3U,
659 MMC_4_3 = 3U,
686 /** Power class information for HS200 at VCC!=1.95V [237] */
707 SD_CSD_DSR_IMPLEMENTED_FLAG = BIT(3),
742 /** Command support bits [33:32] 33-support CMD23, 32-support cmd20*/
766 /** SD card version 1.0-1.01 */
773 SD_SPEC_VER3_0 = BIT(3),
788 SDIO_FUNC_NUM_3 = 3,
853 #define SDIO_CCCR_CAPS_SBS BIT(3) /*!< support bus control */
907 SDIO_SUPPORT_DDR50 = BIT(3),
916 * functions 1-7, but we do not read this data as the stack does not utilize it.