Lines Matching +full:hall +full:- +full:effect

2 # SPDX-License-Identifier: Apache-2.0
4 description: Texas Instruments TMAG5170 high-precision, linear 3D Hall-effect sensor.
8 include: [sensor-device.yaml, spi-device.yaml]
11   int-gpios:
12     type: phandle-array
16       data ready event. For this property to take effect, the
18   operating-mode:
23       1 - stand-by mode - in this mode the device waits for application to trigger
25       2 - active measure mode - continuous sampling on all enabled channels
28       3 - active trigger mode - in this mode, similar to stand-by mode, the device
30       the conversion is shorter than in stand-by mode, on the cost of increased power
32       4 - duty-cycled - after each sample the device goes to sleep and then
34       by `sleep-time` property. Recommended for low-power devices that don't need
37       - 1
38       - 2
39       - 3
40       - 4
41   magnetic-channels:
46       If axis is enabled more than once, sensor will do pseudo-simultaneous
67       - "None"
68       - "X"
69       - "Y"
70       - "XY"
71       - "Z"
72       - "ZX"
73       - "YZ"
74       - "XYZ"
75       - "XYX"
76       - "YXY"
77       - "YZY"
78       - "ZYZ"
79       - "ZXZ"
80       - "XZX"
81       - "XYZYX"
82       - "XYZZYX"
83   x-range:
89       0 = ±50mT (TMAG5170A1)/ ±150mT(TMAG5170A2) - (default; chip reset value)
93       - 0
94       - 1
95       - 2
96   y-range:
102       0 = ±50mT (TMAG5170A1)/ ±150mT(TMAG5170A2) - (default; chip reset value)
106       - 0
107       - 1
108       - 2
109   z-range:
115       0 = ±50mT (TMAG5170A1)/ ±150mT(TMAG5170A2) - (default; chip reset value)
119       - 0
120       - 1
121       - 2
127       effect. If temperature channel is enabled, temperature will be oversampled
128       too, unless `disable-temperature-oversampling` property is present.
137       - 1
138       - 2
139       - 4
140       - 8
141       - 16
142       - 32
143   enable-temperature-channel:
147   magnet-type:
158       - "None"
159       - "NdBFe"
160       - "SmCo"
161       - "Ceramic"
162   angle-measurement:
172       - "None"
173       - "XY"
174       - "YZ"
175       - "XZ"
176   disable-temperature-oversampling:
182   sleep-time:
187       For this property to take effect sensor must be in `duty-cycled` mode.
190       on the values of `oversampling`, `magnetic-channels`, `temperature-channel-enabled`
191       and `disable-temperature-oversampling` properties.
204       - 1
205       - 5
206       - 10
207       - 15
208       - 20
209       - 30
210       - 50
211       - 100
212       - 500
213       - 1000