Lines Matching full:tap
16 tap-mode = <LIS2DW12_DT_SINGLE_DOUBLE_TAP>;
100 # tap and tap-tap configuration section
102 # tap and tap-tap events can be generated on INT1 only.
104 tap-mode:
108 Tap mode. Default is power-up configuration.
115 tap-threshold:
119 Tap X/Y/Z axes threshold. Default is power-up configuration.
122 Thresholds to start the tap-event detection procedure on the X/Y/Z axes.
125 corresponds to disable the tap detection on that axis.
128 and want to disable tap detection on Y, you should specify in Device Tree
130 tap-threshold = <12>, <0>, <14>
134 tap-shock:
138 Tap shock value. Default is power-up configuration.
141 detection to be recognized as a tap event. Where 0 equals 4*1/ODR and
144 tap-latency:
148 Tap latency. Default is power-up configuration.
150 When double-tap recognition is enabled, this register expresses the
152 double-tap event. Where 0 equals 16*1/ODR and 1LSB = 32*1/ODR.
154 tap-quiet:
158 Expected quiet time after a tap detection. Default is power-up configuration.
160 This register represents the time after the first detected tap in which