Lines Matching +full:10 +full:- +full:pin
2 # SPDX-License-Identifier: Apache-2.0
5 When setting the accel-odr and gyro-odr properties in a .dts or .dtsi file you may include
9 #include <zephyr/dt-bindings/sensor/ism330dhcx.h>
14 accel-odr = <ISM330DHCX_DT_ODR_104Hz>;
15 gyro-odr = <ISM330DHCX_DT_ODR_104Hz>;
18 include: sensor-device.yaml
21 drdy-gpios:
22 type: phandle-array
24 DRDY gpio pin
26 This pin defaults to active high when produced by the sensor.
30 int-pin:
34 Select DRDY pin number (1 or 2).
43 configuration at power-up.
46 accel-odr:
51 Default is power-up configuration.
53 - 0 # ISM330DHCX_DT_ODR_OFF
54 - 1 # ISM330DHCX_DT_ODR_12Hz5
55 - 2 # ISM330DHCX_DT_ODR_26H
56 - 3 # ISM330DHCX_DT_ODR_52Hz
57 - 4 # ISM330DHCX_DT_ODR_104Hz
58 - 5 # ISM330DHCX_DT_ODR_208Hz
59 - 6 # ISM330DHCX_DT_ODR_416Hz
60 - 7 # ISM330DHCX_DT_ODR_833Hz
61 - 8 # ISM330DHCX_DT_ODR_1666Hz
62 - 9 # ISM330DHCX_DT_ODR_3332Hz
63 - 10 # ISM330DHCX_DT_ODR_6667Hz
64 - 11 # ISM330DHCX_DT_ODR_1Hz6
66 enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11]
68 accel-range:
72 Range in g. Default is power-up configuration.
74 - 16 # 16g (0.488 mg/LSB)
75 - 8 # 8g (0.244 mg/LSB)
76 - 4 # 4g (0.122 mg/LSB)
77 - 2 # 2g (0.061 mg/LSB)
81 gyro-odr:
86 Default is power-up configuration.
88 - 0 # ISM330DHCX_DT_ODR_OFF
89 - 1 # ISM330DHCX_DT_ODR_12Hz5
90 - 2 # ISM330DHCX_DT_ODR_26H
91 - 3 # ISM330DHCX_DT_ODR_52Hz
92 - 4 # ISM330DHCX_DT_ODR_104Hz
93 - 5 # ISM330DHCX_DT_ODR_208Hz
94 - 6 # ISM330DHCX_DT_ODR_416Hz
95 - 7 # ISM330DHCX_DT_ODR_833Hz
96 - 8 # ISM330DHCX_DT_ODR_1666Hz
97 - 9 # ISM330DHCX_DT_ODR_3332Hz
98 - 10 # ISM330DHCX_DT_ODR_6667Hz
100 enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10]
102 gyro-range:
106 Range in dps. Default is power-up configuration.
108 - 125 # +/- 125dps
109 - 250 # +/- 250dps
110 - 500 # +/- 500dps
111 - 1000 # +/- 1000dps
112 - 2000 # +/- 2000dps