Lines Matching +full:lcu +full:- +full:mux +full:- +full:sel

2 # SPDX-License-Identifier: Apache-2.0
6   with the cooperation of S32 IP blocks- eMIOS, TRGMUX and LCU.
11   micro-ticks-per-rev is set as per vehicle gearbox reduction.
12   lcu output filters are set to capture maximum speed sensitivity and avoid channel noise.
15         compatible = "nxp,qdec-s32";
16         pinctrl-0 = <&qdec_s32>;
17         pinctrl-names = "default";
18         micro-ticks-per-rev = <685440000>;
21         trgmux-io-config =
26         lcu = <&lcu1>;
27         lcu-input-idx = <1>;
30         lcu-mux-sel =
33         lcu-output-filter-config =
34             /* LCU Out HW ID, Rise Filter, Fall Filter */
35             <0 5 5>, /* LCU O0 */
36             <1 5 5>, /* LCU O1 */
37             <2 2 2>, /* LCU O2 */
38             <3 2 2>; /* LCU O3 */
40         emios-channels = <6 7>;
43 compatible: "nxp,qdec-s32"
45 include: [pinctrl-device.yaml, sensor-device.yaml]
48   micro-ticks-per-rev:
59   trgmux-io-config:
67         trgmux-io-config =
73   lcu:
76       phandle to the LCU node.
83   lcu-output-filter-config:
86       This array gives the configuration for each of the four outputs of LCU module.
90       It's length should be '12' - 3 entries for each of the four LCU outputs.
91       Ex: lcu-output-filter-config =
92         /* LCU Out HW ID, Rise Filter, Fall Filter */
93         <0 5 5>, /* LCU O0 */
94         <1 5 5>, /* LCU O1 */
95         <2 2 2>, /* LCU O2 */
96         <3 2 2>; /* LCU O3 */
98   lcu-mux-sel:
101       This array configures the sources of input to the LCU module by programming the muxsel.
103   lcu-input-idx:
106       This array configures the input indices to the LCU module which help to determine the
107       Logic Cell number used inside an LCU instance.
109   emios-channels: