Lines Matching +full:pulse +full:- +full:width

2 # SPDX-License-Identifier: Apache-2.0
4 description: FXOS8700 6-axis accelerometer/magnetometer sensor
6 include: sensor-device.yaml
9   reset-gpios:
10     type: phandle-array
17   int1-gpios:
18     type: phandle-array
25   int2-gpios:
26     type: phandle-array
38       - 8 # 8g (0.976 mg/LSB)
39       - 4 # 4g (0.488 mg/LSB)
40       - 2 # 2g (0.244 mg/LSB)
42   power-mode:
47       - 0 # Normal
48       - 1 # Low noise, low power
49       - 2 # High resolution
50       - 3 # Low power
52   pulse-cfg:
55     description: Pulse configuration register
57   pulse-thsx:
61       Pulse X-axis threshold
62       Threshold to start the pulse-event detection procedure on the X-axis.
63       Threshold values for each axis are unsigned 7-bit numbers with a fixed
65       full-scale range.
67   pulse-thsy:
71       Pulse Y-axis threshold
72       Threshold to start the pulse-event detection procedure on the Y-axis.
73       Threshold values for each axis are unsigned 7-bit numbers with a fixed
75       full-scale range.
77   pulse-thsz:
81       Pulse Z-axis threshold
82       Threshold to start the pulse-event detection procedure on the Z-axis.
83       Threshold values for each axis are unsigned 7-bit numbers with a fixed
85       full-scale range.
87   pulse-tmlt:
91       Pulse time limit
96       high-pass filter configuration (HP_FILTER_CUTOFF[pls_hpf_en]). For
99   pulse-ltcy:
103       Pulse latency
104       The time interval that starts after the first pulse detection where the
105       pulse-detection function ignores the start of a new pulse. The
106       resolution depends upon the sample rate (ODR) and the high-pass filter
110   pulse-wind:
114       Pulse window
116       latency interval in which the start of the second pulse event must be
117       detected provided the device has been configured for double pulse
118       detection. The detected second pulse width must be shorter than the
120       of the double pulse need not finish within the time specified by the
122       and the high-pass filter configuration (HP_FILTER_CUTOFF[pls_hpf_en]).
125   mag-vecm-cfg:
128     description: Magnetic vector-magnitude configuration register
130   mag-vecm-ths-msb:
134       Magnetic vector-magnitude threshold most significant byte.
137   mag-vecm-ths-lsb:
141       Magnetic vector-magnitude threshold least significant byte.