Lines Matching +full:proximity +full:- +full:low +full:- +full:threshold
2 # SPDX-License-Identifier: Apache-2.0
4 description: OSRAM ams TMD2620 Proximity Sensor
8 include: [sensor-device.yaml, i2c-device.yaml]
11 int-gpios:
12 type: phandle-array
15 The interrupt pin of TMD2620 is open-drain, active low.
17 as pull-up, active low.
19 proximity-gain:
22 description: Proximity detection gain of the sensor
24 - 1
25 - 2
26 - 4
27 - 8
29 proximity-pulse-length:
34 - 4
35 - 8
36 - 16
37 - 32
39 proximity-pulse-count:
44 proximity-high-threshold:
46 description: high threshold for interrupt. (min. 0; max. 255)
48 proximity-low-threshold:
50 description: low threshold for interrupt. (min. 0; max. 255)
52 proximity-led-drive-strength:
58 proximity-interrupt-filter:
61 filters proximity interrupt. (min. 0; max. 15)
63 0-> every cycle fires an interrupt
64 1-> 1 consecutive proximity value out of threshold range fires an interrupt
65 2-> 2 consecutive proximity values out of threshold range fires an interrupt
68 enable-wait-mode:
72 wait-time-factor:
75 time the sensor waits between proximity cycles. (min. 0; max 255).
78 wait-long: