Lines Matching +full:in +full:- +full:min
2 # SPDX-License-Identifier: Apache-2.0
8 include: [sensor-device.yaml, i2c-device.yaml]
11 int-gpios:
12 type: phandle-array
15 The interrupt pin of TMD2620 is open-drain, active low.
17 as pull-up, active low.
19 proximity-gain:
24 - 1
25 - 2
26 - 4
27 - 8
29 proximity-pulse-length:
32 description: IR led pulse length in ms
34 - 4
35 - 8
36 - 16
37 - 32
39 proximity-pulse-count:
42 description: count of IR led pulses (min. 1; max. 64)
44 proximity-high-threshold:
46 description: high threshold for interrupt. (min. 0; max. 255)
48 proximity-low-threshold:
50 description: low threshold for interrupt. (min. 0; max. 255)
52 proximity-led-drive-strength:
56 LED drive strength in multiples of 6mA (min. 0; max. 31)
58 proximity-interrupt-filter:
61 filters proximity interrupt. (min. 0; max. 15)
63 0-> every cycle fires an interrupt
64 1-> 1 consecutive proximity value out of threshold range fires an interrupt
65 2-> 2 consecutive proximity values out of threshold range fires an interrupt
68 enable-wait-mode:
72 wait-time-factor:
75 time the sensor waits between proximity cycles. (min. 0; max 255).
76 given in multiples of 2.81 starting at 0 for 2.81ms wait time.
78 wait-long: