Lines Matching +full:max +full:- +full:load +full:- +full:value
1 # Copyright 2019-2020, Peter Bigot Consulting, LLC
3 # SPDX-License-Identifier: Apache-2.0
14 regulator-name:
18 regulator-init-microvolt:
22 regulator-min-microvolt:
26 regulator-max-microvolt:
30 regulator-microvolt-offset:
34 regulator-init-microamp:
38 regulator-min-microamp:
42 regulator-max-microamp:
46 regulator-input-current-limit-microamp:
50 regulator-always-on:
54 regulator-boot-on:
64 regulator-boot-off:
69 regulator-allow-bypass:
73 regulator-allow-set-load:
77 regulator-ramp-delay:
82 (regulator-ramp-delay = <0>) for disabling ramp delay.
84 regulator-enable-ramp-delay:
91 issues such as trace capacitance and load on the supply.
93 regulator-settling-time-us:
100 regulator-settling-time-up-us:
107 regulator-settling-time-down-us:
114 regulator-soft-start:
118 regulator-initial-mode:
125 regulator-allowed-modes:
129 regulator at run-time. Elements may be specified in any order. The set of
133 regulator-system-load:
136 Load in uA present on regulator that is not captured by any consumer
139 regulator-pull-down:
143 regulator-over-current-protection:
147 regulator-oc-protection-microamp:
151 emergency shutdown. Zero can be passed to disable protection and value '1'
155 regulator-oc-error-microamp:
160 passed to disable error detection and value '1' indicates that detection
163 regulator-oc-warn-microamp:
169 detection and value '1' indicates that detection should be enabled but
172 regulator-ov-protection-microvolt:
176 emergency shutdown. Zero can be passed to disable protection and value '1'
180 regulator-ov-error-microvolt:
185 passed to disable error detection and value '1' indicates that detection
189 regulator-ov-warn-microvolt:
195 detection and value '1' indicates that detection should be enabled but
199 regulator-uv-protection-microvolt:
204 value '1' indicates that protection should be enabled but limit setting
208 regulator-uv-error-microvolt:
213 passed to disable error detection and value '1' indicates that detection
217 regulator-uv-warn-microvolt:
223 disable detection and value '1' indicates that detection should be enabled
227 regulator-temp-protection-kelvin:
232 value '1' indicates that protection should be enabled but limit setting
235 regulator-temp-error-kelvin:
240 can be passed to disable error detection and value '1' indicates that
243 regulator-temp-warn-kelvin:
249 disable detection and value '1' indicates that detection should be enabled
252 regulator-active-discharge:
255 - 0
256 - 1
263 regulator-max-step-microvolt:
269 startup-delay-us:
273 off-on-delay-us: