Lines Matching full:limit

46   regulator-input-current-limit-microamp:
150       Set over current protection limit. This is a limit where hardware performs
152       indicates that protection should be enabled but limit setting can be
158       Set over current error limit. This is a limit where part of the hardware
161       should be enabled but limit setting can be omitted.
166       Set over current warning limit. This is a limit where hardware is assumed
167       still to be functional but approaching limit where it gets damaged.
170       limit setting can be omitted.
175       Set over voltage protection limit. This is a limit where hardware performs
177       indicates that protection should be enabled but limit setting can be
178       omitted. Limit is given as microvolt offset from voltage set to regulator.
183       Set over voltage error limit. This is a limit where part of the hardware
186       should be enabled but limit setting can be omitted. Limit is given as
192       Set over voltage warning limit. This is a limit where hardware is assumed
193       still to be functional but approaching limit where it gets damaged.
196       limit setting can be omitted. Limit is given as microvolt offset from
202       Set over under voltage protection limit. This is a limit where hardware
204       value '1' indicates that protection should be enabled but limit setting
205       can be omitted. Limit is given as microvolt offset from voltage set to
211       Set under voltage error limit. This is a limit where part of the hardware
214       should be enabled but limit setting can be omitted. Limit is given as
220       Set over under voltage warning limit. This is a limit where hardware is
221       assumed still to be functional but approaching limit where it gets
224       but limit setting can be omitted. Limit is given as microvolt offset from
230       Set over temperature protection limit. This is a limit where hardware
232       value '1' indicates that protection should be enabled but limit setting
238       Set over temperature error limit. This is a limit where part of the
241       detection should be enabled but limit setting can be omitted.
246       Set over temperature warning limit. This is a limit where hardware is
247       assumed still to be functional but approaching limit where it gets
250       but limit setting can be omitted.