Lines Matching full:high
7 The PWM CCU8 module can automatically generate a high-side
11 The module supports adding a dead time between the high-side and
15 transitions from 0 to 1, preventing the high-side and low-side
20 two channels. A channel consists of a corresponding high-side
40 channel-deadtime-high = <0 0 0 0 PWM_MSEC(100) 0 0 0>;
46 This will configure channel 4 with a 100msec deadtime on the high
60 'HIGH_LOW' indicates whether the pin is for the high or low-side signal.
62 It's not necessary to specify both the high and low pinctrls. Only the low-side
68 duty cycle and high/low dead times. But the pulse duration applies to
108 channel-deadtime-high:
112 Defines the dead time in nanoseconds for the high-side PWM signal for each channel.