Lines Matching +full:current +full:- +full:source +full:- +full:pin
2 # SPDX-License-Identifier: Apache-2.0
6 compatible: "st,stm32wb0-pwr"
8 include: "st,stm32-pwr.yaml"
11 smps-mode:
18 - SMPS converter disabled
19 - LDOs supply voltage: VDD
29 - SMPS converter enabled - clock disabled
30 - LDOs supply voltage: VDD (though SMPS)
31 - Current supplied to LDOs can be limited
35 - SMPS converter enabled - clock enabled
36 - LDOs supply voltage: regulated SMPS output
37 - Target output voltage can be programmed
39 - "OFF"
40 - "PRECHARGE"
41 - "RUN"
43 smps-bom:
54 This property is required if `smps-mode` is not "OFF".
56 - 1
57 - 2
58 - 3
60 smps-clock-prescaler:
66 The SMPS clock, CLK_SMPS, comes from a 16 MHz source that
78 This property is only used if `smps-mode` is not "OFF".
80 - 2
81 - 4
83 smps-lp-floating:
86 Floating SMPS output in low-power state
88 If this property is set, the SMPS output pin (VFBSD)
89 is left floating when the SoC is in low-power state.
92 PRECHARGE mode when the SoC is in low-power state.
95 smps-current-limit:
99 SMPS output current limit (in mA)
102 output current allowed for the SMPS, and is also equal
106 the output current limitation feature is not available.
108 This property is only used if `smps-mode` is "PRECHARGE".
110 - "2_5"
111 - "5"
112 - "10"
113 - "20"
115 smps-output-voltage:
124 This property is only used if `smps-mode` is "RUN".
126 - "1V20"
127 - "1V25"
128 - "1V30"
129 - "1V35"
130 - "1V40"
131 - "1V45"
132 - "1V50"
133 - "1V55"
134 - "1V60"
135 - "1V65"
136 - "1V70"
137 - "1V75"
138 - "1V80"
139 - "1V85"
140 - "1V90"
141 - "1V95"