Lines Matching full:smps
11 smps-mode:
15 SMPS mode selection
18 - SMPS converter disabled
21 WARNING: The SMPS must not be disabled on board using the
22 'SMPS supply configuration', so this mode should NEVER be
26 Refer to RM0505 §5.5 "SMPS step down regulator" for details.
29 - SMPS converter enabled - clock disabled
30 - LDOs supply voltage: VDD (though SMPS)
35 - SMPS converter enabled - clock enabled
36 - LDOs supply voltage: regulated SMPS output
43 smps-bom:
46 SMPS L/C BOM selection
54 This property is required if `smps-mode` is not "OFF".
60 smps-clock-prescaler:
64 SMPS clock prescaler factor
66 The SMPS clock, CLK_SMPS, comes from a 16 MHz source that
74 All features of the SMPS can be used regardless of which
78 This property is only used if `smps-mode` is not "OFF".
83 smps-lp-floating:
86 Floating SMPS output in low-power state
88 If this property is set, the SMPS output pin (VFBSD)
91 If this property is not set, the SMPS is placed in
95 smps-current-limit:
99 SMPS output current limit (in mA)
102 output current allowed for the SMPS, and is also equal
108 This property is only used if `smps-mode` is "PRECHARGE".
115 smps-output-voltage:
119 SMPS regulated output voltage
124 This property is only used if `smps-mode` is "RUN".