Lines Matching +full:medium +full:-

2 # SPDX-License-Identifier: Apache-2.0
19       /* You can put this in places like a board-pinctrl.dtsi file in
23       /* include pre-defined combinations for the SoC variant used by the board */
24       #include <dt-bindings/pinctrl/renesas/pinctrl-ra.h>
32             drive-strength = "medium";
50     pins, such as the 'input-enable' property in group 2. Here is a list of
53     - bias-disable: Disable pull-up/down (default, not required).
54     - bias-pull-up: Enable pull-up resistor.
55     - input-enable: Enable input from the pin.
56     - drive-strength: Set the drive strength of the pin. Possible
57       values are: low, medium, highspeed-high, high.
59     To link pin configurations with a device, use a pinctrl-N property for some
62        #include "board-pinctrl.dtsi"
65              pinctrl-0 = <&uart0_default>;
66              pinctrl-1 = <&uart0_sleep>;
67              pinctrl-names = "default", "sleep";
70 compatible: "renesas,ra-pinctrl-pfs"
74 child-binding:
77   child-binding:
80       - name: pincfg-node.yaml
81         property-allowlist:
82           - bias-disable
83           - bias-pull-up
84           - input-enable
85           - drive-open-drain
95       drive-strength:
98           - "low"
99           - "medium"
100           - "highspeed-high"
101           - "high"
106       renesas,analog-enable: