Lines Matching +full:bias +full:- +full:disable

2 # SPDX-License-Identifier: Apache-2.0
16     https://www.kernel.org/doc/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
19   bias-disable:
21     description: disable any pin bias
23   bias-high-impedance:
25     description: high impedance mode ("third-state", "floating")
27   bias-bus-hold:
31   bias-pull-up:
33     description: enable pull-up resistor
35   bias-pull-down:
37     description: enable pull-down resistor
39   bias-pull-pin-default:
43   drive-push-pull:
47   drive-open-drain:
51   drive-open-source:
55   drive-strength:
59   drive-strength-microamp:
63   input-enable:
68   input-disable:
71       disable input on pin (e.g. disable an input buffer, no effect on output)
73   input-schmitt-enable:
75     description: enable schmitt-trigger mode
77   input-schmitt-disable:
79     description: disable schmitt-trigger mode
81   input-debounce:
84       Takes the debounce time in μsec, as argument or 0 to disable debouncing
86   power-source:
90   low-power-enable:
94   low-power-disable:
96     description: disable low power mode
98   output-disable:
100     description: disable output on a pin (e.g. disable an output buffer)
102   output-enable:
108   output-low:
112   output-high:
116   sleep-hardware-state:
122   slew-rate:
126   skew-delay:
131         many double-inverters are used to delay the signal.