Lines Matching +full:control +full:- +full:selection

2 # SPDX-License-Identifier: Apache-2.0
8   the pin function selection and pin properties. This node, labeled 'pinctrl' in
20     #include <nxp/s32/S32K344-257BGA-pinctrl.h>
26           output-enable;
30           input-enable;
40   'bias-pull-up' or 'slew-rate' that will be applied to all the pins defined in
41   'pinmux' array. To enable the input buffer use 'input-enable' and to enable the
42   output buffer use 'output-enable'.
44   To link the pin configurations with UART0 device, use pinctrl-N property in the
45   device node, where 'N' is the zero-based state index (0 is the default state).
49       pinctrl-0 = <&uart0_default>;
50       pinctrl-names = "default";
56     - input and output buffers disabled
57     - internal pull not enabled
58     - slew rate "fastest"
59     - invert disabled
60     - drive strength disabled.
64     - Safe Mode Control (disabled)
65     - Pad Keeping (disabled)
66     - Input Filter (disabled).
68 compatible: "nxp,s32k3-pinctrl"
72 child-binding:
74   child-binding:
78       - name: pincfg-node.yaml
79         property-allowlist:
80           - bias-disable
81           - bias-pull-down
82           - bias-pull-up
83           - input-enable
84           - output-enable
93           information in a 32-bit value.
95       slew-rate:
98           - "fastest"
99           - "slowest"
102           Slew rate control. Can be either slowest or fastest setting.
108           Invert the signal selected by Source Signal Selection (SSS) before
111       nxp,drive-strength: