Lines Matching +full:1 +full:pin

5   LPC pinctrl node. This node defines pin configurations in pin groups, and has
7   pin configuration defines a peripheral's pin configuration. Each numbered
22   IOCON_FUNC=<pin mux selection>,
26   IOCON_DIGIMODE=1,
32   IOCON_FILTEROFF=1
34   IOCON_EGP=1
35   IOCON_I2CFILTER=1
38   drive-open-drain: IOCON_OD=1
40   bias-pull-down: IOCON_MODE=1
55   description: LPC IOCON pin controller pin group
58       LPC IOCON pin controller pin configuration node
74           Pin mux selection for this group. See the SOC level pinctrl header
83           Pin output slew rate. Sets the SLEW field in the IOCON register.
87           1 SLEW_1- fast mode, output slew rate is faster
91           Invert the pin input logic level
95           Set the pin to analog mode. Sets DIGIMODE=0, and ASW=1. Only valid for
100           Select the pin's alternate analog mode. Valid on LPC55s3x family SOCs
106           - "1v8"
108           Pin output power source. Only valid for I2C mode pins running in I2C
133           Enable I2C pullup resistor. If not present, pin is open drain in I2C
138           Enable I2C mode for a pin. If not present, pin is in GPIO mode. Only