Lines Matching full:gpios

45     In this case, the 'dfegpio[n]-gpios' properties configure GPIO pins
48     Each dfegpio[n]-gpios property which is set is used to initialize the
51     None of the dfegpio[n]-gpios properties are marked 'required',
56     That in turn means that at least one dfegpio[n]-gpios
59     4 GPIOs must be provided (since 4 GPIO pins support switching up to
62     GPIOs are used in order, following the indices of the dfegpio[n]-gpios
64     antenna switch patterns to GPIOs.
71     0x3 means that antenna GPIOs at indexes 0 and 1 will be set, while
74     The number of GPIOs specified with dfegpio[n]-gpios properties
76     GPIOs, the pattern count cannot be greater than 16, and the
154       switching patterns. This pattern will also be used to drive GPIOs
155       when the radio releases control of GPIOs used to switch antennas.
157   dfegpio0-gpios:
165         dfegpio1-gpios = <&gpio0 2 0>;
169         dfegpio1-gpios = <&gpio1 4 0>;
174   dfegpio1-gpios:
177       Pin select for DFE pin 1. See description for dfegpio0-gpios.
179   dfegpio2-gpios:
182       Pin select for DFE pin 2. See description for dfegpio0-gpios.
184   dfegpio3-gpios:
187       Pin select for DFE pin 3. See description for dfegpio0-gpios.
189   dfegpio4-gpios:
192       Pin select for DFE pin 4. See description for dfegpio0-gpios.
194   dfegpio5-gpios:
197       Pin select for DFE pin 5. See description for dfegpio0-gpios.
199   dfegpio6-gpios:
202       Pin select for DFE pin 6. See description for dfegpio0-gpios.
204   dfegpio7-gpios:
207       Pin select for DFE pin 7. See description for dfegpio0-gpios.