Lines Matching +full:extra +full:- +full:byte

2 # Copyright (c) 2019-2020 Nordic Semiconductor ASA
3 # SPDX-License-Identifier: Apache-2.0
10 # reading at runtime, while still allowing the driver to pull out extra
21   jedec-id:
22     type: uint8-array
29   sfdp-bfp:
30     type: uint8-array
32       Contains the 32-bit words in little-endian byte order from the
34       Parameters table.  This provides flash-specific configuration
38   quad-enable-requirements:
41       - "NONE"
42       - "S2B1v1"
43       - "S1B6"
44       - "S2B7"
45       - "S2B1v4"
46       - "S2B1v5"
47       - "S2B1v6"
51       Use NONE if the device detects 1-1-4 and 1-4-4 modes by the
53       byte, and can be configured by reading then writing one byte with
56   enter-4byte-addr:
59       Enter 4-Byte Addressing value from JESD216 BFP DW16
62       from the sfdp-bfp property (CONFIG_SPI_NOR_SFDP_DEVICETREE) or to read
65       For CONFIG_SPI_NOR_SFDP_MINIMAL this is the 8-bit value from bits 31:24
66       of DW16 identifying ways a device can be placed into 4-byte addressing
67       mode.  If provided as a non-zero value the driver assumes that 4-byte
69       automatically puts the device into 4-byte address mode when the device
72   page-size:
79       from the sfdp-bfp property (CONFIG_SPI_NOR_SFDP_DEVICETREE) or