Lines Matching +full:white +full:- +full:output +full:- +full:current

5 include: i2c-device.yaml
8   red-output-current:
11     description: Output current of red channel in 0.1 mA (0-25.5 mA).
12                  Default value is the power-on default. Valid range = 0 - 255
13   green-output-current:
16     description: Output current of green channel in 0.1 mA (0-25.5 mA)
17                  Default value is the power-on default. Valid range = 0 - 255
18   blue-output-current:
21     description: Output current of blue channel in 0.1 mA (0-25.5 mA)
22                  Default value is the power-on default. Valid range = 0 - 255
23   white-output-current:
26     description: Output current of white channel in 0.1 mA (0-25.5 mA)
27                  Default value is the power-on default. Valid range = 0 - 255
29   enable-gpios:
30     type: phandle-array
32       GPIO to enable LP5562 (both Charge-pump and Digital Communications interface).
34       pull-up resistor).