Lines Matching +full:touch +full:- +full:average +full:- +full:control

2 # SPDX-License-Identifier: Apache-2.0
8 include: [i2c-device.yaml, touchscreen-common.yaml]
11   int-gpios:
12     type: phandle-array
14       Interrupt GPIO. Used by the controller to signal touch data is
17   raw-x-min:
23   raw-y-min:
29   raw-x-max:
35   raw-y-max:
41   panel-driver-settling-time-us:
44       - 10
45       - 100
46       - 500
47       - 1000
48       - 5000
49       - 10000
50       - 50000
51       - 100000
56       As a general rule, 1-5 nF capacitors require around 500 us settling time, and 5-10 nF need
60   touch-detect-delay-us:
63       - 10
64       - 50
65       - 100
66       - 500
67       - 1000
68       - 5000
69       - 10000
70       - 50000
73       Touch detect delay (microseconds) is the delay from the activation of the pull-up resistor
74       in the X+ line to the time the device performs touch detection.
78   touch-average-control:
81       - 1
82       - 2
83       - 4
84       - 8
87       Average control (number of samples).
90       more latency in the touch detection process.
92       Use cases that require low touch detection latency
96   tracking-index:
99       - 0
100       - 4
101       - 8
102       - 16
103       - 32
104       - 64
105       - 92
106       - 127
110       the current touch position and the previous touch position.
112       Lowering the tracking index increases the frequency of touch events,