Lines Matching full:dbm
62 local regulations. By default this value set an output power above 0dBm
77 tx-pwr-min = -17 dBm and tx-pwr-max = +4 dBm. Using 48 elements in the
80 tx-pwr-min = [01 11]; /* -17.0 dBm */
81 tx-pwr-max = [00 04]; /* 4.0 dBm */
90 using the linear step in dBm as:
92 linear_step = (4 - (-17)) / (48 - 1) => ~0.45 dBm
94 Assuming that user wants set 0 dBm as output power:
97 output_power = tx-pwr-table[9] => 0x07 ( 0 dBm as table 9-9 )
103 sets the transceiver to use always a value above 0 dBm as output power.
109 This value represent minimum normalized value in dBm for the transceiver
113 is the minimal value in dBm for the transceiver output power. By default,
121 This value represent maximum normalized value in dBm for the transceiver
125 value in dBm for the transceiver output power. By default, the